2.5.2.1. Analog Line Circuits 
- Add the module configuration data (peripheral line
module):
AD-BCSU:MTYPE=PER,LTU=number,SLOT=number,PARTNO=string, [LWVAR=string];
IMPORTANT:
As a rule, line modules are loaded with the loadware for Germany. Some modules, however, require different loadware variants in order to comply with PTT requirements in foreign countries (e.g. SLMA Q2141-X). The parameter 'LWVAR' can be used in order to specify the required loadware variant when the modules are configured. For a list of possible loadware variants for each module, please consult the appropriate module description. Once the module has been configured, the loadware variant can be changed with the AMO ZAND. - Assign a class of service:
AD-COSSU:AVCE=param;
- Assign a class of parameter (device handler
parameters):
AD-COP:PAR=param;
- Assign a class of trunk
AD-COT:PAR=param;
- Lines for incoming traffic only are normally not assigned to trunk groups.
- Assign an analog line
circuit:
AD-TACSU:PEN=pen,COTNO=number,COPNO=number,LCOSV=number, LCOSD=number, DEVTYPE=<circuit_type>,DEV=<circuit_type>;