10.11.5.4.3. Generation (Example) 
- 1. Configuring the function for attendant consoles:
You must be in expert mode to administer the function for attendant consoles.Expert mode --> ComWin --> Open ...< IP> using AMO (see AMO command).
Configure with AMO ZAND as follows:CHANGE-ZAND:TYPE=ALLDATA3,CIDBON=NO;
- 2. Configuring the function for STN 7141:
Configuration Management --> Lines --> Station, enter station number and Search. Select "Malicious call tracing" in the Basic 3 tab and save.Set function using AMO SDAT as follows:
CHANGE-SDAT:STNO=7144,TYPE=DATA,TRACE=YES;