Configure central system data to support the E911 feature requirements
-
CHA-ZAND:TYPE=ALLDATA2,OOSTONE=YES,ECN=004114953111;
OOSTONE:- For the signed off subscriber no E911 dialling
is possible with this parameter a tone can be configured so that the
subscriber can notice that this Apparatus is not usable.
ECN-This is the System wide Callback Number for Emergency Calls. This
number must be configured in the International Number format with Prefix
digits. This Number works internally with the TON=unknown and NPI=ISDN.
Care has to be taken when sending out this number over analog lines that
a limit of the length is configured. See section " LODR"