- Bus configuration of RNR 3270 with MSN 3271 on S0 bus (SLMS 1-1-25-2)
ADD-SBCSU:STNO=3270,OPT=FBUS,CONN=DIR,PEN=1-1-25-2,
DVCFIG=SET600&DEE&FAX,COS1=24,COS2=5,LCOSS1=1,
LCOSS2=1,LCOSD1=1,LCOSD2=1,SPROT="SBDSS1",
FPROT="SBDSS1",DPROT="SBDSS1",SOPTIDX=10,
FOPTIDX=10,DOPTIDX=10,EXTBUS=YES;
ADD-SBCSU:STNO=3271,OPT=MSN,MAINO=3270,
COS1=24,COS2=5,LCOSS1=1,LCOSS2=1,LCOSD1=1,
LCOSD2=1;
- Point-to-point configuration on SLMS/STMD with RNR 3177 In contrast to the bus configuration,
all possible services are configured the same.
ADD-SBCSU:STNO=3177,OPT=FPP,CONN=DIR,PEN=1-2-31-0,
DVCFIG=S0PP,COS1=24,COS2=5,LCOSS1=1,LCOSS2=1,
LCOSD1=1,LCOSD2=1,COSX=0,PROT="SBDSS1",OPTIDX=10;
- Configuration of STNO via PNT E on SLMO
ADD-SBCSU:STNO=3100,OPT=OPTI,CONN=DIR,PEN=<number>,
DVCFIG=OPTISET,COS1=<number>,COS2=<number>,
LCOSS1=<number>,LCOSS2=<number>,
LCOSD1=<number>,LCOSD2=<number>;
ADD-SBCSU:STNO=3232,OPT=OPTIEXP,MAINO=3100,
DVCFIG=SET600&DEE&FAX,COS1=<number>,
COS2=<number>,LCOSS1=<number>,
LCOSS2=<number>,LCOSD1=<number>,
LCOSD2=<number>,SPROT="SBDSS1",FPROT="SBDSS1",
DPROT="SBDSS1",SOPTIDX=2,FOPTIDX=4,DOPTIDX=4;
