Collapse AllExpand All

10.30.1.3. Station class of service Previous topic Parent topic Child topic Next topic

The possible classes of service are shown in the next table:
COS
DSS1 LM
Default
Comment
CCBS
CCBS
set
The calling subscriber can activate a functional callback if the line is busy; n.b.: Bit 5 of byte 3 must be set in the option table
COLR
COLR
set
The called subscriber line can temporarily suppress the display of its own phone number to the calling party (controlled by terminal)
CW
CW
set
The called subscriber has call waiting class of service
FGAUT
MCID
 
This class of service must be set together with the MCIDM class of service so that all incoming calls can be registered automatically. Additional manual registration is not possible.
GEP, GESP, GEBINT
AOC
 
Call charge information is output on the terminal
MCIDA
MCID
 
Automatic registration of ringing malfunctions; the calling subscribers disconnect before the call is connected
MCIDM
MCID
 
Manually activated registration of call data during the call or following disconnection
MSN
MSN
set
Multiple Subscriber Number;only for functional terminals
MULTRA
-
set
Only for functional terminals
OVCAT
COLR
 
The phone number of the called subscriber is also output on the terminal for a secret number
SPECAR
CLIP/COLP
 
Only activate if the phone number configured on the terminal is not to be checked
SUBCAL
SUB
 
Called subscriber is informed of the phone number of the calling subscriber by means of subaddressing
SUBDB
SUB
 
The called subscriber is notified of own phone number by means of subaddressing
SUBMSN
SUB
 
The called subscriber is notified of MSN number by means of subaddressing
TP
TP
set
The subscriber can park a call for the maximum duration of two minutes in an active call state
UUS1IM
UUS
set
Class of service for using the UUS1 service is implicit
UUS3
UUS
 
Class of service for using the UUS3 service