- As described before, the telephones on which the software is to be loaded must be
configured
with the new value VIRTDTE instead of DTE.
ADD-SBCSU:STNO=3100,TYPE=OPTI,CONN=DIR,PEN=number,
DVCFIG=OPTISET&VIRTDTE,COS1=number,COS2=number,
LCOSV1=number,LCOSV2=number,LCOSD1=number,LCOSD2=number,
DPROT=SBDSS1,DOPTIDX=1;
- In addition to VIRTDEE, the BASIC COS parameter must be set under DTE in
the AMO SBCSU:
DIS-COSSU:TYPE=COS,COS=<cos_number>;
H500: AMO COSSU STARTED
+------+-----------------+---------------+-----------------+
| COS | SPEECH | FAX | DTE |
+------+-----------------+---------------+-----------------+
| 13 |> |
| | TA | TA | TA |
| | TNOTCR | TNOTCR | TNOTCR |
| | CDRSTN | BASIC | BASIC |
| | COSXCD | | |
| | MB | | |
| | CFNR | | |
| | FWDNWK | | |
| | TTT | | |
| | FWDECA | | |
+------+-----------------+---------------+-----------------+
AMO COSSU-111 - Classes of service
ABFRAGEN DURCHGEFUEHRT;
If
BASIC is not entered in the DTE column, this must be configured:
CHA-COSSU:TYPE=COS,COS=<cos number>,
ADTE=TA&TNOTCR&BASIC;;
- The terminal must now still be activated:
RESTART-DSSU:TYPE=STNO,STNO=3100;
