10.44.4.1. SLMA Access 
- Configure the SLMA2 board:
ADD-BCSU:MTYPE=PER,LTG=ltg,LTU=ltu,SLOT=slot, PARTNO=partno;
If features are to be blocked (new for OpenScape 4000):
- Assign the voice paging device (only significant parameters for voice paging are shown
- other
parameters such as COS1, etc. must also be given a value):
ADD-SCSU:STNO=number,DVCFIG=ANATE, SPEC=VCEPAGE&SUFDIAL,DIAL=DTMF;
If features are not to be blocked:
- Assign the voice paging device (only significant parameters for voice paging are shown
- other
parameters such as COS1, etc. must also be given a value):
ADD-SCSU:STNO=number,DVCFIG=ANATE, SPEC=SSTN&SUFDIAL,DIAL=DTMF;