10.47.3. Generation (Example) 
To be able to configure an S2 station, a corresponding board must
be configured and free in the system (with S2 port). In addition, the
appropriate number of station numbers must be entered in the DPLN. Below
is an example of a connection in the form of a station with 30 MSN numbers.
- Set up an S2 primary station number (3581):
ADD-SBCSU:STNO=3581,OPT=FPP,CONN=DIR,PEN=1-5-37-0, DVCFIG=S2PP,COS1=23,COS2=23,LCOSV1=1,LCOSV2=1, LCOSD1=1,LCOSD2=1,PROT=SBDSS1,PERMACT=Y,OPTIDX=10;
- Set an MSN as the primary station number (if multiple numbers are needed for S2):
ADD-SBCSU:STNO=3600&&3629,OPT=MSN,MAINO=3581, COS1=23,COS2=23,LCOSV1=1,LCOSV2=1,LCOSD1=1, LCOSD2=1;