10.53.2.1. Create and add 
AnaTe
- Party A is in conversation with Party B
IMPORTANT:
Operation is different from the U.S V6.6. User must dial access code to bring party into conference. V6.6 uses hookflash to bring party into conference.Stn A is in talk state to Stn B. A initiates consultation hold and dial the code for stn C . When C answers A initiates again consultation hold and dials the conference access code. All partys hear conference tone and the conference is established
- PartyA is in a conference with Party B and Party C (prior to dialing party D)
Stns A,B and C are in conference. Stn A initiates consultation and dials stn D . At this point although the conference is on "hold" no MOH is heard and the conference carries on as normal i.e. B and C are in conference. Stn A can bring Stn D into the conference.
DigiTe or DFT
The conference feature with digital telephones is similar to the Anate in function
but is made
easier due to the extra functionality with these sets. Access to a conference is via
CONF
key, or the Conference switch from the Optiguide menu reached by pressing > after
consulting with a party. Also with digital telephone sets there is the possibility
for a
display function
With Station controlled conference the display is different from previous
versions.
It is also possible
to view members of the conference.
