Collapse AllExpand All

10.55.4.3. Outdial Rule Previous topic Parent topic Child topic Next topic

  • Dialing must lead to the digit analysis result CTDL.
  • The AMO LODR can only contain the value "END".
  • If an ECMAV2 link starts with a step by step dialing digit analysis result, then parameter "OUTPULSE" must be configured before the "END" in the AMO LODR and it must be assigned the value of the node number of the next allocated node (exception: where the ECMAV2 protocol has been altered using a customer-specific patch and PRODE commands so that the parameter "OUTPULSE" is not needed).
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.