ADD-WABE:CD=544,DAR=CTDL,CHECK=N;
 
ADD-BUEND:TGRP=244,NAME="Step_by_Step-DTMF-1",
NO=1,RSV=N,TRACENO=0,ACDTHRH=*,PRIONO=1,
CHARCON=NEUTRAL;
 
ADD-COP:COPNO=244,PAR=ANS&LSUP&RLSA&DTN&
DTMF&DTM1&NO1A&TIE&IDP1,TRK=TA,TOLL=TA;
 
ADD-COT:COTNO=244,PAR=RCL&ANS&TIE&IEVT&ANNC;
 
CHANGE-COT:COTNO=244,COTTYPE=COTADD,DEV=INDEP,
INFO="Step_by_Step-analog-DP";ADD-COSSU:NEWCOS=220,
AVCE=TA&TNOTCR&CDRSTN&CDRINT&CDRC;
 
ADD-TACSU:PEN=1-2-67-24,COTNO=244,COPNO=244,DPLN=0,
ITR=0,COS=220,LCOSV=1,LCOSD=1,TGRP=244,COFIDX=0,
CCT="Step_by_Step-DP ",DESTNO=0,ALARMNO=0,CARRIER=1,
ZONE=EMPTY,INS=Y,DEVTYPE=TC,DEV=BWCISL,MFCVAR=0,
SUPPRESS=0,DGTCNT=0,TESTNO=1,CIRCIDX=11,CDRINT=1,
CCTINFO=0,DIALTYPE=DTMF-DTMF,DIALVAR=0-0,COEX=0;
 
ADD-RICHT:MODE=LRTENEW,LRTE=244,LSVC=ALL,TGRP=244,
DNNO=1-1-100,REROUT=NO,ROUTATT=NO,INFO="Step_by_Step-DP";
 
ADD-LODR:ODR=7,CMD=END;
 
ADD-LDAT:LROUTE=244,LSVC=ALL,LVAL=1,TGRP=244,ODR=7,
LAUTH=1,CARRIER=1,ZONE=EMPTY,LATTR=NONE,DNNO=1-1-100,
MSO=NONE,BANDW=1,VCCYC=4;
 
ADD-LDPLN:LDP="544",LROUTE=244,LAUTH=1;