If the parameter XFBADIAL in AMO FEASU is set alternatively, the
following features are either deactivated or are no longer possible on
the first connection ( via S0/S2):
- returning call forwarding no answer
A second B channel is used for consultation.
This feature cannot be used with first connection with Release Control.
If the feature "Emergency disconnect after internal dialing"
is active on the first connection, Transfer before Answer ex Call State
cannot be activated.
If consultation before answer was activated on the outgoing first
connection the features e.g. Call Park, Override/Camp-on, Callback cannot
be activated on the first connection. These features can be used again,
as soon as the station returns to the first connection. Only answered
calls can be parked. On the consulting party's side the DAR "NOT
POSSIBLE" are displayed, i.e. the feature is not supported.
If consultation before answer was activated on the outgoing first
connection, the consultation connection is override protected. This protection
applies after call transfer. It is released, when the initial connection
answers.
After transfer the consulting partner cannot finish incomplete dialing
to the first destination.
If consultation before answer was initiated on the outgoing first
connection, a conference before answer on the outgoing first connection
is not possible.
Fixed DTMF dialing on the first connection must not be configured
(AMO Richt).
