Section 10.59.4.3.1. Campon

10.59.4.3.1. Campon

In order to receive the US campon beeps the following ZAND parameter must be set.
```
CHANGE-ZAND:TYPE=ALLDATA2,CAMPON=YES;
```
Additionally to control the interval between campon beeps the following DTIM2 command is used.
```
CHANGE-DTIM2:TYPEDH=GEN,CMPOBEEP=60; /*60 = seconds between 
beeps*/
```

${DocTitle}, ID: ${DocID}

© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.