Section 10.59.4.3.4. Announcements

10.59.4.3.4. Announcements

In order to receive the announcements, "Please holds the line" , " You have a message" the following parameters must be set.

This command insures that the correct loadware in included.
```
CHANGE-ZAND:TYPE=ALLDATA, SIUANN=D;
```

These commands activate the announcements inside the system.

CHANGE-ZAND:TYPE=ALLDATA, ANATESIG=RA;

CHANGE-ZAND:TYPE=ALLDATA, HOLDTN=RA;

In order to have the tone set to the correct timeslot use the following commands.

CHANGE-ZAND:TYPE=TONES,CP=HOLDLINE,SIU=16; /* For  "Please 
hold the line" */CHANGE-ZAND:TYPE=TONES,CP=HOLDLINE,SIU=21; /
* For  "You have a message" */

${DocTitle}, ID: ${DocID}

© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.