2.4.1 Error Messages

 
F01:
MEMORY RESERVED FOR ACD GROUPS IS INSUFFICIENT.
ALLOCATE ADDITIONAL MEMORY WITH THE FOLLOWING COMMAND:.
 
ADD-DIMSU:ACDGRP=<?>;
F02:
ACD GROUP ACDGRP=@@@ HAS ALREADY BEEN CREATED.
F03:
THE FOLLOWING RESTRICTIONS MUST HOLD AMONG
THE LED ACTIVIZATION THRESHOLD VALUES:
ON:@@@ < FLASH:@@@ < WINK:@@@.
F05:
SUPERVISOR SUPEXT=@@@@@@ IS NOT CONFIGURED.
 
(SEE AMOS SBCSU,STNO)
F07:
STATION NUMBER SUPEXT=@@@@@@ HAS BEEN
CONFIGURED AS A FLOATING STATION.
 
(SEE AMO SCSU,INS=FLOAT)
F09:
SUBSCRIBER SUPEXT=@@@@@@
HAS NO SUPERVISOR CLASSMARK.
ADD REQUIRED CLASSMARK WITH THE FOLLOWING COMMAND:
 
CHANGE-SDAT:STNO=@@@@@@,TYPE=ATTRIBUT,AATTR=SUPER;
F10:
THE ACD GROUP WAS ADDED AS A PRIMARY GROUP.
IT CAN BE ASSIGNED TO A DIFFERENT SUPERVISOR
ONLY AFTER ASSIGNING AN OTHER GROUP TO BE THE
PRIMARY GROUP OF SUPERVISOR SUPEXT=@@@.
F11:
ACD GROUP ACDGRP=@@@ IS STILL
REFERENCED BY ACD ROUTING TABLES.
ENTER COMMAND 'DISP-ACDRT;' AND SEARCH FOR ENTRIES
HAVING THE WORDS 'ACDGRP', 'CACDGRP' IN THE
OUTPUT COLUMN MARKED BY HEADER 'PARAMETER'.
(ACTION=RTGRP/COND)".
F12:
THE ACD GROUP ACDGRP=@@@ IS NOT CONFIGURED.
F13:
THE SPECIFIED ACD GROUP IS CONFIGURED AS A PRIMARY GROUP.
IT CAN BE DELETED ONLY AFTER ASSIGNING
AN OTHER GROUP TO BE THE PRIMARY GROUP
OF SUPERVISOR SUPEXT=@@@@@@
F14:
THE SPECIFIED ACD GROUP CAN BE DELETED ONLY
AFTER DELETING THE AGENTS STILL ASSIGNED TO IT.
DISPLAY THE GROUP'S AGENTS WITH THE FOLLOWING COMMAND:
DISP-AGENT:ACDGRP=@@@.
F15:
THE SPECIFIED ACD GROUP IS CONFIGURED AS A PRIMARY GROUP.
IT CAN BE CHANGED INTO A NORMAL GROUP
BY ASSIGNING AN OTHER GROUP TO BE THE
PRIMARY GROUP OF SUPERVISOR SUPEXT=@@@@@@.
F16:
ACD FEATURE IS BLOCKED.
ACTIVATE IT WITH THE FOLLOWING COMMAND:.
 
CHANGE-ZAND:TYPE=ACD,ACDALLOW=YES;
F17:
COULD NOT BLOCK ACD GROUP ACDGRP=@@@.
 
(NEGATIVE ACKNOWLEDGEMENT FROM CALL PROCESSING)
F19:
THE GIVEN PMSAN IS NOT SET. SET IT WITH:
ADD-RICHT:PM,<IDX>,,,<SAN>,<NAME>;
A NUMBER BETWEEN 1-10 MUST BE ENTERED FOR IDX
SAN VALUE MUST BE EQUAL TO THE PMSAN OF AMO-ACDGP
F20:
DELETION NOT ALLOWED. ACD PM GROUP @@@ IS ASSOCIATED
WITH TRUNK GROUP @@.
F21:
IT IS NOT ALLOWED TO CHANGE THE TYPE OF AN ACD GROUP
F22:
GROUP PILOT NUMBER GRPPN @@@@@@ IS NOT A VALID DIRECTORY NUMBER CONFIGURED WITH AMO DNIT ROUTING=DRTD ODER DRTSDA.
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.