46.3.1 START-CLIST

The Start action outputs the entire cyclic file.

If the parameter ADR is specified, output begins with this line. (If ADR=5 the output begins with the fifth oldest line.)

If the parameter LEN is specified, the number of lines specified by LEN will be displayed, beginning with the very oldest line in the cyclic file or after the number of lines defined by ADR.

Procedure Overview


Command Code	Parameter
START-CLIST	FILENAME=<string>,[ADR=<number>],[LEN=<number>]
	,[ANS=<PARAM>];

Examples

From the cyclic file C-File, display the 5 oldest lines.

Input:

START-CLIST:"C-FILE",,5,N;

Output:

+-------------------- CUSTOMER DATA BACKUP & RESTORE --------------------+
| |
| ROUTINE BACKUP : DEACTIVATED - BY AMO-ORDER |
| |

Display the entire cyclic file C-FILE.

Input:

START-CLIST:"C-FILE";

Output:

+-------------------- CUSTOMER DATA BACKUP & RESTORE --------------------+
| |
| ROUTINE BACKUP : DEACTIVATED - BY AMO-ORDER |
| |
| DESTINATION-FILE : :PAS:TESTFILE |
| |
| COMPRESSION : NONE |
| |
| DATE: 01/01/1993 TIME: 16-55-00 REP-TYPE: HOUR REP-INTERVAL: 1 |
| |
| CURRENT PHASE : NONE |
| |
+------------------------------------------------------------------------+

F05: BST NOT SWITCHED ON.
RESIDENT PART OF BST NOT AVAILABLE.
AMO-BST -125 BACKGROUND SIGNALLING TASK
DISPLAY NOT COMPLETED;
H500: AMO DATE STARTED
+------------------------+

CONTINUE (Y/N/C) ?

<y
| DATE: TIME : |
| 1993-04-07 11:06:01 |
+------------------------+

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.