61.2.1 ADD-DAGR

Add the parameters for the output files of CDR. The output files are the CDRC-files (CDRC1 and CDRC2) and the FT-file.
For the CDRC-files there are only the file-sizes which can be added. The maximum size for each file is 65535 data records.
For the FT-file is the file size not a fixed limit. This file size ensures that the file will be created with this sizes.
For the FT-file the parameters for controling the copy of the file (Copy time and Copy period) as well as the customer specific file name and the output code of the data records can be added.
For the copy time the day and the hour of the first copy time will be entered. At this it will be checked if the day is possible for the actual or the next month. If this is not a possible date, then the AMO gives an error massega and the value is interrogated again. The copy period is the time after which the next copy will be started. The value 0 means that there is no copy period (only the first copy).
Is the end of file reached during the storage of the data records, the copy of the file to the customer specific filename is started. Is the customer specific file not picked up, then the FT-file will be added to this file. With this action it is possible that the file size of the FT-file will be exceeded. In this case it is possible that the data records are added to the file as long there is no more space on the CDR-Area (":CGD:-Area") of the Hard disk.
With the parameter output code it will be defined in which code (ASCII or EBCDIC) the data record is formatted. If the ouput code is changed (from ASCII to EBCDIC or reverse) the AMO gives an advisory that the file has to be copied and transfered. In this case a manually copy of the file must be started that the file can be transferred. This avoids that there are different formatted data record in the file.
Is the output code changed and the customer specific FT-file is not picked up, then the change will not be done. The change must be done in the following way:
1.
Switch the corresponding selection group to COLLECT (AMO-SELS).
2.
Start copy of the FT-file with action COPY.
3.
Pick up the customer specific FT-file with the file transfer.
4.
Change the file parameter output code.
5.
Switch on the corresponding selection group (AMO-SELS).
Procedure Overview
 
Command Code
Parameter
 
ADD-DAGR
|FILE=CDRC1,NO=<number>;
(1)
 
 
 
 
|FILE=CDRC2,NO=<number>;
(2)
 
 
 
 
|FILE=FT,NO=<number>,CODE=<name>,TIME=<number>,
(3)
 
PERIOD=<number>,NAME=<string>;
 
Examples
1.
Add the file size for FILE CDRC1 with 9000 data records
Input:
ADD-DAGR:CDRC1,9000;
 
2.
Add the parameters for the FT-file with 40000 data records, Output code ASCII, first copy time on the 20th of the actual month at 23 o’clock with period 48 hours. Name of the customer specific file is "FILETRANSFER1".
Input:
ADD-DAGR:FT,40000,ASC,20-23,48,"FILETRANSFER1";
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.