66.2.1
ADD-DCIC
The ADD-DCIC function is used to assign a new DCI.
The parameter PEN describes the physical port of the DCI. If PEN is not specified, a compatible available port is searched for and displayed.
The parameter STNO is used to make a terminal device previously created by means of SCSU an associated station. A DTE (data terminal equipment) must not be assigned for this STNO, nor may a DTE be allocated by means of AMO TGER.
The parameter INS can be used to activate the DCI at the same time the static data are written. The DCI is activated by means of an order to the device control (DC)
Procedure Overview
Command Code
Parameter
ADD-DCIC
[PEN=<gg-uu-sss-cc>],STNO=<number>,[INS=<param>];
Examples
1.
Create a DCI with associated telephone 2101, a predefined PEN, and activate immediately.
Input:
AD-DCIC:1-1-1-0,2101,Y;
Output:
ADD-DCIC:1-1-1-0,2101,Y;
H1 : DCI ASSIGNED AT PEN 1-1-1-0
H4 : DCI RELEASED FOR CALL PROCESSING
2.
Create a DCI with associated telephone 2101, an available PEN, but do not activate.
Input:
AD-DCIC:,2101,N;
Output:
H1 : DCI ASSIGNED AT PEN 1-1-1-1
${DocTitle}
, ID:
${DocID}
©
02/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.