101.3.1 CHANGE-FUNCT

101.3.1 CHANGE-FUNCT

Changes the functions (switch settings).

If a parameter value is given for a certain switch during command input, this switch is set to the specified value, even if this value was already set.

If a switch position is skipped over during command input, the switch in question remains unchanged.

•

Default during initialization:
Switch for subsystem UBGDAT and for CC/decoupled mode or "splitting mode" to OFF, Type of power supply to AC/DC without redundancy and all other switches to ON.

•

A check is made during switching of the RTOs for VMS and TCS as to whether the RTO in question is present.

•

If you changed the system language (parameter LANG) for terminal input/output, this change will only take effect after a soft restart of the ISP (EXECUTE-REST:UNIT,A1,SOFT,;). However, a soft restart is not required when changing the session-specific administration language (parameter SLANG)!

•

A change to the power supply type is done without checking to see if this type of power supply is present.

•

A change to the pfi type is done without checking to see if the PFI (power fail interrupt) is read on this switch.

•

A change of SS7 controller type is done without checking whether this controller is really attached.

•

The function "switch off logging of certain AMOs" is possible from Hipath V2.0 inclusively onward.

•

Procedure Overview.


Command Code	Parameter
CHANGE-FUNCT	[CMDECHO=<param>],[AMOOK=<param>],[AMOHDR=<param>]
	,[SUSY=<param>],[RTOADS=<param>],[RTOTFS=<param>]
	,[RTOVMS=<param>],[LANG=<param>],[SPLIT=<param>]
	,[RETENT=<number>],[POWERSYS=<param>],[PFI=<param>]
	,[SS7CTR=<param>],[SLANG=<param>],[REGIN=<param>]
	,[REGKEY=<param>],[REGLEN=<param>]
	,[LOGBKOFF=<number>],[CONFREST=<param>];

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.