150.4 Error Messages and Advisories

150.4.1 Error Messages

 
F01:
STNO <xxxxxx> IS NOT A STATION NUMBER
F02:
STATION <xxxxxx> HAS NOT BEEN ADDED
F03:
THE MAXIMUM NUMBER OF <xxxxx> NAMES CAN NOT BE PASSED OVER.
 
(EXTENSION WITH AMO DIMSU, PARAMETER NAME)
F04:
THE MAXIMUM NUMBER OF <xxxxx> ORGS CAN NOT BE PASSED OVER.
 
(EXTENSION WITH AMO DIMSU, PARAMETER ORG)
F05:
<c----c> <x----x> DOES NOT CORRESPOND TO THE PRESENT LENGTH,
 
<l----l> = <ll>
F06:
<c----c> <x----x> ALREADY ASSIGNED TO A <t----t>
F07:
THE MAXIMUM NUMBER OF <xxxxx> PINS CAN NOT BE PASSED OVER.
(EXTENSION WITH AMO DIMSU, PARAMETER ID)
F08:
NAME <n----n> IS NOT ENTERED UNDER STNO <xxxxxx>
F09:
OLDORG <o----o> WAS NOT FOUND IN THE SYSTEM
F10:
OLDORG <o----o> WAS NOT FOUND UNDER STNO <xxxxxx>
F11:
<x----x> WAS NOT FOUND <a----a>
F12:
<x----x> HAS ALREADY BEEN ENTERED IN THE SYSTEM
F14:
<x----x> HAS INVALID LENGTH
F15:
RANGE LIMITS HAVE DIFFERENT LENGTHS
F16:
<x----x> AND <x----x> HAVE DIFFERENT LENGTHS
F17:
LENGTH ENTRY CANNOT BE CHANGED -
 
ALL PINS OF PIN TYPE <c----c> MUST FIRST BE DELETED
F18:
BLOCKING NOT POSSIBLE - ALL PINS OF PIN TYPE <c----c> MUST FIRST BE DELETED
F19:
<1----1> IS ALREADY ADDED
F20:
FOR ITR <xx> COCO AND FPOINT ARE NOT ADDED
F23:
<c----c> IS BLOCKED
F24:
NAMES MUST NOT BEGIN WITH *
F25:
NAMES MUST NOT CONTAIN ONLY BLANKS
F26:
CODE <kkkkkk> DOES NOT LEAD TO DAR CCMS
F27:
CODE <kkkkkk> LEADS TO DPLN GROUP BRANCH
F28:
STATION NUMBER <xxxxxx> HAS NOT BEEN ASSIGNED WITHIN THE SYSTEM
F29:
NO ROUTE TO TMOM ASSIGNED
F30:
RANGE OF STATION NUMBERS MUST NOT EXCEED 100
F31:
NO FURTHER STNO/CCNO ENTRY ALLOWED FOR THIS CCMS
F32:
STATION NUMBER <xxxxxx> ALREADY IN STNO/CCNO TABLE
F33:
NO STATION NUMBER FOUND IN RANGE <xxxxxx>-<xxxxxx>
F34:
STATION NUMBER <xxxxxx> NOT FOUND IN STNO/CCNO TABLE
F35:
SPECIFIED CCNO IS INVALID
F36:
NAME <xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> IS ALREADY ASSIGNED TO STNO <xxxxx>
F37:
STATION <xxxxxx> IS MAPPED TO STATION NO. <xxxxxx> VIA AMO-RUFUM;
 
PLEASE USE THIS AMO FOR FURTHER PROCESSING.
F38:
NONE OF THE AVAILABLE PIN TYPES LEADS TO PCODE
F39:
PIN TYPE <aa> DOES NOT LEAD TO PCODE (CHANGE-PERSI:TYPE=COPIN, COTYPE=PCODE)
F40:
PCODE ENTRY <x----x> ALREADY EXISTS
F41:
<c----c> LEADS TO PIN TYPE PCODE. ASSIGNMENT TO STATION NUMBER IS NOT PERMISSIBLE
F42:
ORG. UNITS CAN ONLY BE ASSIGNED TO NAMES (ONE ORG. UNIT PER NAME)
F43:
<p----p> CANNOT BE CHANGED IF <p----p> = <w----w>
F44:
<p----p> = <w----w> IS NOT VALID IF <p----p> <g> <w----w>
F45:
PIN, PCODE AND SI MUST NOT CONTAIN #
F46:
FOR OLDPIN <a----a> PIN TYPE <aa> IS ASSIGNED.
THE PIN MUST CONTAIN ONLY DIGITS.
F47:
STNO <xxxxxx> IS AN ATTENDANT CONSOLE.
ATTENDANT CONSOLES CANNOT BE ASSIGNED PINS.
F48:
COSHOME PARAMETER CANNOT BE ASSIGNED 'NO' FOR COPIN@@ WHICH IS USED BY ONS GROUP MEMBERS(STNO=@@@@@@).
F49:
COPIN PARAMETER HAS TO BE SPECIFIED OTHERWISE COMMAND CANNOT PROCESSED SUCCESSFULLY.
F50:
PIN IS IN USE AT A FOREIGN STATION @@@@@@@@@@@@ DELETING OF PIN CODE IS NOT ALLOWED.
F51:
PIN IS IN USE AT A MASTER STATION @@@@@@@@@@@@ DELETING OF PIN CODE IS NOT ALLOWED.
F52:
THE STATION @@@@@@@@@@@@ IS MASTER STATION OF AN ONS DELETING OF PIN 15 IS NOT ALLOWED.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 20, ID: P31003H31A0S107207620
 © 05/2026 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.