166.2.4 DISPLAY-SBCSU

With the DISPLAY action, terminal data, bus configurations and MSN links can be interrogated.

The type of output can be specified by declaring the parameter TYPE:

•

TYPE=TERMDATA
The parameter values with which the terminals in the specified range were configured are output in tabular form for each STNO (even if MSN).

•

TYPE=BUS
The bus/OPTISET configurations in the specified station number range are output. For each bus/OPTISET configuration, a table is displayed with the following data: type of bus, type of connection, port equipment number, all STNOs allocated to the bus, terminal configurations of each station number with corresponding TSI numbers allocated and MSN station numbers or MSN secondary station numbers eventually assigned.

•

TYPE=BUSDATA
Combination of TYPE=TERMDATA and TYPE=BUS for all configurations in the station number range specified.

•

TYPE=FPP
This outputs the corresponding MSN station numbers for all existing S0/S2 point-to-point connections. For each connection, a table is output with the following data: type of connection, port equipment number and a list of all MSN station numbers assigned.

•

TYPE=MSN
Those station numbers in the specified station number range are output, which have been configured with DVCFIG=MSN.

•

TYPE=OPTIDAT
For all OPTISET / OPTIP500 / OPTIIP terminals installed within the specified station number range, the assigned individual terminal data (phone ID, asset ID, SW version, self-test result) and the currently valid hardware settings (ringing volume, ringing tone, warning signal volume, call volume via handset, call volume via loudspeaker, hands-free characteristics, display contrast, Self-Labelling Keys display contrast, rollover volume) are output.

For all OPTIIP terminals installed within the specified station number range, also the HFA data (IP address, emergency number, LIN, SW capabilities) reported by the IP terminal are output.

•

TYPE=SEARCH
Those station numbers in the specified station number range are output, which meet a certain search criterion as specified by the optional parameters CONN, DEV, COSNO, LCOSV, LCOSD, TRACE, KEYSYS and INS.

Procedure Overview


Command Code	Parameter
DISPLAY-SBCSU	[STNO=<number>]
	,[TYPE=TERMDATA\BUS\BUSDATA\FPP\MSN\OPTIDAT];

	\|,[TYPE=SEARCH],
	{ [CONN=<param>][,DEV=<param>][,COSNO=<number>] [,LCOSV=<number>][,LCOSD=<number>] [,TRACE=<param>][,KEYSYS=<param>] [,INS=<param>]}; [TYPE=IPSEARCH],IPADDR=<string>;

Examples

Display the configuration data for STNO 3427

Input:

DISP-SBCSU:STNO=3427;

Output:

The output data for a station is subdivided into 6 groups:

Data which is also contained in the input command.

License State information (only if restrictions apply).

Mobile HFA status information (only if OPTIIP terminal).

Activation identifiers for the features.

Features and group memberships which are not assigned by the AMO SBCSU

Subscriber attributes which are assigned by the AMO SDAT. If the shelf default value is used for SRCGRP or TCLASS, this value is displayed in parentheses.

Explanation of MOBILE HFA STATE :

IP PHONE INACTIVE =

Flag if OPTIIP terminal is currently not available, because

•

it is either visited by a different subscriber via Mobile HFA LOGON (so displayed subscriber cannot be reached anymore when dialing his/her usual station number)

•

or after Mobile HFA LOGOFF there is simply no home phone plugged (so displayed subscriber cannot be reached either when dialing his/her station number)

Explanation of ACTIVATION IDENTIFIERS FOR FEATURES:


FWDS	=	Call forwarding for voice (speech)
FWDF	=	Call forwarding for FAX
FWDD	=	Call forwarding for data terminal equipment (DTE)
HTOS	=	Hunting group out, voice (release from hunting group)
HTOF	=	Hunting group out, FAX
HTOD	=	Hunting group out, DTE
DND	=	Do-not-disturb
VCP	=	Voice call protection
CWT	=	Call waiting - terminating
TWLOGIN	=	Teleworking LOGIN Status

Explanation of FEATURES AND GROUP MEMBERSHIPS :


PUGR	=	Station assigned to a call pickup group
ESSTN	=	Station in executive/secretary system
ROLE	=	Role in the executive/secretary system (see AMO CHESE)
KEYSYS	=	Station upgraded to a Keysystem (AMO KCSU)
NOPTNO	=	Station assigned to a night option
HUNT CD	=	Station assigned to a hunting group

Explanation of SUBSCRIBER ATTRIBUTES (AMO SDAT) :

see AMO SDAT

Interrogate the bus configuration with STNO 3427

Input:

DISP-SBCSU:STNO=3427,TYPE=BUS;

Output:

Interrogate the MSN station numbers for an S0/S2 point-to-point connection

Input:

DISP-SBCSU:STNO=3460,TYPE=FPP;

Output:

MAINO =3460 CONN =EXT PEN = 1- 2- 25- 0
DVCFIG =S2PP
----------------- MSN STATION NUMBERS ----------------
3461 3462
--------------------2 IN TOTAL------------------------

Interrogate all stations to which COS 6 is assigned (COS1 or COS2)

Input:

DISP-SBCSU:TYPE=SEARCH,COSNO=6;

Output:

-------- SUBSCRIBER WITH --------------------------
DEV : CONN :
TRACE : COSNO : 6
KEYSYS : LCOSV :
INS : LCOSD :
---------------------------------------------------
3400 3401 3402 3403 3404 3405
3427 3428 3525
---------------------9 MATCH(ES)-------------------

Interrogate all signed-off keysystems

Input:

DISP-SBCSU:TYPE=SEARCH,KEYSYS=Y,INS=SIGNOFF;

Output:

-------- SUBSCRIBER WITH --------------------------
DEV : CONN :
TRACE : COSNO :
KEYSYS : Y LCOSV :
INS : SIGNOFF LCOSD :
---------------------------------------------------
2189 2190
---------------------2 MATCH(ES)-------------------

Interrogate all MSN station numbers/ MSN secondary station numbers

Input:

DISP-SBCSU:TYPE=MSN;

Output:

| | S E R V I C E |
STNO | MAINO | VOICE | FAX | DTE |
--------+---------+----------+----------+----------+
3428 | 3427 | OPTIP500 | MSN | MSN |
3461 | 3460 | MSN | MSN | MSN |
3462 | 3460 | MSN | MSN | MSN |
4999 | 3427 | | MSN | MSN |
--------+---------+----------+----------+----------+

Note:

All MSN station numbers/MSN secondary station numbers for a specific main station number of a bus or OPTISET configuration may be found with
DISP-SBCSU: TYPE=BUS, STNO=...;

All MSN station numbers for a specific FPP main station number may be found with
DISP-SBCSU: TYPE=FPP, STNO=...;

Interrogate individual OPTISET / OPTIP500 / OPTIIP terminal data and hardware settings.

Input:

DISP-SBCSU:STNO=2190,TYPE=OPTIDAT;

Output:

Interrogate individual UFIP terminal data and hardware settings.

Input:

DISP-SBCSU:STNO=2190,TYPE=OPTIDAT;

Output:

+------ IP SETTINGS ---------------------- UFIP --------2190---------------+
| SUBIPADDR: 0. 0. 0. 0 EMERG NO : |
| SW CAPAB : DMC_V1 FASTCONN LIN : |
| TLSSUPP |
+------------------- ONLY FIRST REGISTRATION DATA SHOWN -------------------+
| IP ADDRESS: 10.133. 15. 37 UA CSTA : TRUE |
| CLIENT TYPE: N/A EPID : SC2fc1d6 |
| UA STRING : OpenStage_40_V3 R5.17.0 SIP 190920 simple-uaCSTA |
+--------------------------------------------------------------------------+

Note:

•

SUBIPADDR: contains the IP address configured with AMO SBCSU. Example:

ADD-SBCSU:STNO=2190,OPT=OPTI,...,SUBIPADD=1.2.3.4;

•

IP ADDRESS: contains the IP address sent by the HG board to the RMX board during the registration process.

•

UA CSTA: sent by the UFIP phone to the HG board during the registration process.

•

CLIENT TYPE: type of the registering device. Only a few types of client are supported.

•

EPID: physical identifier of the UFIP phone.

UA STRING: string sent by the UFIP phone to the HG board during registration. Its length is limited to 63 characters.

${DocTitle}, ID: ${DocID}

© 02/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
All other trademarks herein are the property of their respective owners.