220.5 Error Messages and Advisories

220.5.1 Error Messages

 
F00:
FUNCTION NOT IMPLEMENTED
F01:
SOURCE STATION <srcno> IS UNASSIGNED OR AS AN ACD NUMBER (AMO DNIT) CONFIGURED.
F02:
SOURCE STATION <srcno> IS AN ATND
F03:
SOURCE STATION <srcno> IS NOT AN ATND
F04:
SOURCE STATION <srcno> IS NOT A DIGITE WITH PROGRAMMABLE KEYS
F05:
SOURCE STATION <srcno> IS NOT AN ANATE / DIGITE
F06:
SOURCE STATION <srcno> IS NOT A MEMBER OF AN EXEC./SECRETARY SYSTEM
F07:
SOURCE STATION <srcno> HAS NO SPEED CALLING DIRECTORY
F08:
DESTINATION NO. IS UNASSIGNED
F09:
DESTINATION NO. IS NOT A MESSENGER
F10:
FOR SOURCE STATION <srcno>, THE MAX. VALUE FOR SPDNO IS <num>.
F11:
DESTINATION NO. MAY ONLY CONTAIN THE CHARACTERS 0-9,*,#,
AND THE CODES C13, C14, C15, C18, OR C24
F12:
DESTINATION NO. IS NOT ALLOWED AS FORWARDING DESTINATION.
F13:
DSS LIMIT EXCEEDED, INCREASE PARAMETER DSS IN AMO DIMSU
F14:
KEY <kyno> IS AT <dev> NOT PREASSIGNED FOR DIRECT STATION SELECTION
F15:
KEY <kyno> IS AT <dev> NOT PREASSIGNED AS A REPERTORY KEY
F16:
SOURCE STATION <srcno> IS NOT AN OPTISET/OPTIP500
F19:
ADD-ON TERMINAL @@@ HAS NOT BEEN ADDED. LEVEL 3 AND 4 CAN NOT BE ENTERED.
F20:
KEY <kyno> IS INVALID
F21:
ADD-ON TERMINAL <terminal> HAS NOT BEEN ADDED.
F22:
NO FREE MEMORY FOR DESTINATION ENTRY
 
INCREASE PARAMETER CFWDEST IN AMO DIMSU
F23:
NO FREE MEMORY FOR ENTRY IN LEVEL 3 OR 4.
 
INCREASE PARAMETER DSSNA IN AMO DIMSU.
F24:
NO FREE MEMORY FOR SLK-TEXT ENTRY.
 
INCREASE PARAMETER SLKTEXT IN AMO DIMSU.
F25:
DESTINATION NO. IS NOT A ROUTE CODE
F26:
DESTINATION NO. LEADS TO DAR ’VMOWN’;
 
ONLY POSSIBLE FOR SERVICES VOICE/FAX
F27:
DESTINATION NO. DOES NOT LEAD TO DAR ’STN’
F28:
FUNCTIONAL TERMINALS AND ATTACHED ANALOG TERMINALS ARE NOT PREASSIGNED FOR DSS.
F29:
DESTINATION HAS ALREADY BEEN ENTERED AS DSS DESTINATION BY MAX. NO. OF DSS USERS. SEE PARAMETER DSSRT IN AMO ZAND.
F30:
IN THE CASE OF SI1=VCE, A CODE MUST BE SPECIFIED FOR DAR VMOWN (FOR SERVERS LOCATED IN THE LOCAL NODE) OR DAR NETW (FOR SERVERS LOCATED IN REMOTE NODES) FOR PARAMETER MRCD
F31:
IN THE CASE OF SI1=FAX, A CODE MUST BE SPECIFIED FOR
 
DAR FAX FOLLOWED BY A CODE EITHER FOR
 
DAR VMOWN (FOR SERVERS LOCATED IN THE LOCAL NODE) OR
 
DAR NETW (FOR SERVERS LOCATED IN REMOTE NODES) FOR PARAMETER MRCD
F32:
DEV=<dev> IS INVALID FOR SOURCE STATION <srcno>
F33:
LEVEL IS NOT VALID FOR THE ENTERED DEVICE.
LEVEL=2 IS VALID ONLY FOR NAME KEYS ON OPTISET/OPTIPOINT ADD ON TERMINALS
OR OPENSTAGE/DPIP MAIN DEVICES.OR OPENSTAGE/DPIP/DPCP MAIN DEVICES.
LEVEL=3 AND 4 ARE VALID ONLY FOR NAME KEYS ON OPTISET ADD ON TERMINALS AD1 AND AD2.
F34:
WITH CFVAR = SYSTEM, PARAMETER ITYPE MUST BE ENTERED (INT/EXT).
F35:
SOURCE STATION <srcno> IS A SPECIAL SUBSCRIBER WHICH MUST NOT BE ASSIGNED AS DESTINATION.
F36:
SOURCE @@@@@@@@@@@@ DOES NOT HAVE A DEVICE CONFIGURED WITH THE VALUE ENTERED UNDER PARAMETER SERVICE INDICATOR(SI)
F37:
Forwarding is not allowed for value entered in parameter SI and API configuration
F40:
THE STATION NUMBER IS NOT ALLOWED TO BE SET UP AS A FWD-DESTINATION,
BECAUSE IT IS USED AS ACD HELP STATION NUMBER.
F42:
SOURCE STATION <srcno> IS UNASSIGNED FOR SERVICE <si>.
F43:
THE FEATURE FWD FOR SERVICE <si> IS NOT RELEASED.
F44:
RANGE LIMIT VALUES FOR PARAMETER <par> HAVE DIFFERENT LENGTHS
F45:
HE GIVEN DSS-KEY IS WRITE-PROTECTED AND CAN ONLY BE PROCESSED
BY AMO ZIELN.
F46:
PARAMETER COMBINATION NOT ALLOWED.
PERMISSIBLE COMBINATIONS:

PARAMETER: CFVAR DTYPE ITYPE

VALUES: STATION CFU GEN

SYSTEM CFU INT,EXT
CFB INT,EXT
CFNR INT,EXT
CFDND INT,EXT
F47:
SRCNO IS A DSS1 DEVICE: FOR ADMINISTRATION USE AMO ACTDA.
F48:
NO DESTINATION ADDED TO THE ENTERED <type>-KEYS ON <dev>.
F49:
DESTINATION NUMBER LEADS TO AN EMERGENCY ROUTE.
F50:
INTERNAL LOGIC FAULT
F51:
KEY <tasnr> IS AT <ger> NOT PREASSIGNED AS A REPERTORY KEY OR TERMINAL TYPE <ger> IS NOT CONFIGURED.(DISPLAY-SBCSU:<qrnr>;AND CHECK PARAMETER REP).
F52:
CALL FORWARDING IS NOT ALLOWED BETWEEN MEMBERS OF THE SAME ONS GROUP.
F53:
NO FREE MEMORY FOR EXTNAME ENTRY. INCREASE PARAMETER EXTNAME IN AMO DIMSU.
F54:
DEV=@@@ AND LEVEL=@ ARE INVALID FOR SOURCE STATION @@@@@@@@@@@@
F55:
ONLY LEVEL=1 & 2 ARE SUPPORTED FOR NAME KEYS ON OPENSTAGE/DPIP/DPCP MAIN MODULES AND ADD ON TERMINALS.
F56:
ONLY LEVEL=1 IS SUPPORTED FOR NAME KEYS ON OS15 ADD ON TERMINAL.
F57:
BG5 IS SUPPORTED ONLY FOR BLF.
F58:
ONLY LEVEL=1 IS SUPPORTED FOR KEYS ON BLF.
F59:
NO NAME KEYS WITH CONFIGURED DESTINATIONS COULD BE FOUND
F60:
NO NAME KEY CONFIGURED ON @@@
F61:
NO DESTINATION ADDED TO THE ENTERED @@@@@-KEYS.
F62:
SRCNO is not a DESK number. (AMO SBCSU)
${DocTitle}, ID: ${DocID}
 © 02/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG.
 All other trademarks herein are the property of their respective owners.