2.2.6.1.1. AMO BFDAT 
Using the AMO BFDAT, the profile of the board is defined with a maximum
number of B channels.
- ADD-BFDAT, parameter BRDBCHL
-
The parameter BRDBCHL determines if a block for a board with 60 or 120 b channels will be configured.
- ADD-BFDAT, parameter FUNCTION
-
With the parameter FUNCTION you can configure the functions of the common gateway (i.e. HG 3500, HG 3530, etc.).
- CHANGE-BFDAT, parameter BCHLCNT
-
With the parameter BCHLCNT you can configure the maximum number of b channels per function. This value must not be higher than the maximum number of b channels possible for this function (see Section 2.6.1.2, “AMO BCSU”, parameter BCHLCNT).