2.2.6.1.2. AMO BCSU 
The profile configured with AMO BFDAT (maximum number of b channels
(BRDBCHL) and configured functions (FUNCTION)) is evaluated
by AMO BCSU. Additionally the activated features in the system (i.e.
DMC, SPE) will be considered. An automatic b channeled reduction will
be performed (see Section 2.6.1.2, “In the case of bandwidth problems, etc. the current value of the B channels that can be used for each configured function must be reduced. This can be done in AMO BCSU with the b channel parameters (i.e. BCHL3530, BCHLSIP, BCHL3550).”).
With DISPLAY-BCSU the following information can be found:
- How many b channels are available on the board (BCHANNELS).
- How many b channels have been configured wit AMO BFDAT per function (BCHANNELS).
- How many b channels are possible per function (BCHLCNT). The parameter BCHLCNT depends on what feature has been activated (see Section 2.6, “B Channels”). The value in parameter BCHLCNT can be lower than the configured number of b channels for this function in AMO BFDAT. But only the amount of b channels of parameter BCHLCNT are available for the function.
In the case of bandwidth problems, etc. the current value
of the B channels that can be used for each configured function must
be reduced. This can be done in AMO BCSU with the b channel parameters
(i.e. BCHL3530, BCHLSIP, BCHL3550).