2.3.1.1. General Information 
HG 3500 is supported with the following boards:
- STMI2 (Q2316-X and Q2316-X10)
- STMI4 (Q2324-X500 and Q2324-X510)
- STMIX (Q2343-X)
- STMIY (Q2361-X)
IMPORTANT:
Starting with V10R0 the support for STMI2 will not be offered
anymore. The replacement for STMI2 is STMIX/STMIY.
The HG 3500 replaces the following gateways:
- HG 3530 (HFA subscriber)
- HG 3540 (SIP Trunking (native & SIP-Q) and SIP subscriber)
- HG 3550 (IP Trunking)
- HG 3570 (IPDA (host side) - Master and IPDA (host side) - DMC)
With the HG 35000 gateway different sub features (e.g. trunking and IPDA)
can be used in parallel on a board (Multiple Feature Support (MFS)).
The gateway can also be used as Single Feature Configuration.
The HiPath Feature Access (HFA) concept will be made available for
other functions.
IMPORTANT:
Restriction: Only one trunking protocol
may be configured for each board. There are no restrictions on interworking
with other functions.
Configuration example for Multiple Feature Support: see Chapter 15, “Multiple Feature Support Configuration at the Common Gateway (Example)”.
Examples of single feature configuration can be found in the documents:
- HiPath Feature Access (HFA)
- IP Distributed Architecture (IPDA)
- Access Point Emergency (APE)
- SIP Connectivity > Chapter 6, “Configuration of SIP-Q-Trunking / Native SIP Trunking” or
- H323-/H323-Annex-trunking