2.12.10. TYPE JB - Configuring the Jitter Buffer 
A basic understanding of procedures and configuration parameters is
required to perform jitter buffer configuration. Refer to Section 1.5,
“Jitter Buffer”.
The adaptive jitter buffer (JBMODE=2) that reduces delays is set by
default.
 |
Configuration Management > System Data
> IPDA > IPDA Access Point
Click Search and select
the access point.
Enter the parameter on the General tab
under Jitter Buffer and click Save.
|
 |
CHANGE-STMIB:MTYPE=NCUI2,LTU=99,TYPE=JB,
AVGDLYV=40,MAXDLYV=120,MINDLYV=20,PACKLOSS=4,
AVGDLYD=60,MAXDLYD=200,JBMODE=2; |
These changes are started directly on the access point and become
effective when the next connection is set up.