2.14.1. TYPE ASC - Changing the Payload QoS Setting in Host
System 
In this branch, the Quality of Service for the payload of an access
point can be configured. The settings can differ from HG 3500 to HG 3500.
If the routers do not support DiffServ, the standard TOS value must be
configured without DiffServ. If DiffServ is supported, but not the CodePoints,
the value specified by the network operator must be configured.
In the example, the standard TOS value is set for HG 3500 in LTU 5,
mounting slot 91 without DiffServ (see also Table
3, “TOS values”).
 |
Configuration Management > System Data
> IPDA > IPDA System Data
Enter settings under Payload
Connections on the System Data tab and click Save.
|
 |
CHANGE-CGWB:MTYPE=CGW,LTU=5,SLOT=91,TYPE=ASC,TOSPL=16; |
This change is loaded directly to the board and is effective immediately
without interrupting operation.