2.14.2. TYPE ASC - Setting the Codec List for DMC Connections,
RTP Packet Size, and Voice Activity Detection 
See also Chapter
14, “Codec Settings”.
This branches' parameters only apply to one HG 3500 board. Therefore
each HG 3500 board could be configured differently in an OpenScape 4000
system.
To ensure the usability and the correct diagnosis of the system, these
parameters must have identical settings (FUNCTION=HG3570) for all HG
3500 boards.
In the example, the audio sample size for G.711 and G.729 is set to
60 ms for the common gateway HG 3500 1-5-91. This results in a higher
packeting delay, but a comparatively low transmission bandwidth requirement.
 |
Configuration Management > System Data > Board > Board
Click Search and select STMI.
Set the times for G.711 and G.729 on the STMI Board Data tab and click
Save.
|
 |
CHANGE-CGWB:MTYPE=CGW,LTU=5,SLOT=91,TYPE=ASC,PRIO=PRIO1,CO
DEC=G711,RTP=60;
CHANGE-CGWB:MTYPE=CGW,LTU=5,SLOT=91,TYPE=ASC,PRIO=PRIO2,CO
DEC=G729,RTP=60; |
These changes are loaded directly to the HG 3500 and become effective
immediately without interrupting operation.