Collapse AllExpand All

2.14.11. TYPE JB - Configuring the Jitter Buffer Previous topic Parent topic Child topic Next topic

A basic understanding of procedures and configuration parameters is required to perform jitter buffer configuration. Refer to Section 1.5, “Jitter Buffer”.
The adaptive jitter buffer that reduces delays is set by default.
assistant-2.gif
Configuration Management > System Data > IPDA > IPDA Access Point
Click Search and select the access point.
Enter the parameter on the General tab under Jitter Buffer and Save.
comwin-2.gif
 
CHANGE-CGWB:MTYPE=CGWB,LTU=5,SLOT=91,TYPE=JB,

              AVGDLYV=40,MAXDLYV=120,MINDLYV=20,PACKLOSS=4,

              AVGDLYD=60,MAXDLYD=200, JBMODE=2;
WBM
Configuration > Payload > HW Modules > Edit DSP Jitter Settings
These changes are started directly on the access point and become effective when the next connection is set up.
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.