The common gateway supports a Command Line Interface (CLI) for installation and basic configuration, e.g. IP infra structure. In V.24 CLI it is possible to change security relevant data (e.g. SSL Configuration), because the V.24 is considered to be secure. Additionally the CLI allows the monitoring of important counters and statistics.

The CLI can be accessed via V.24. The CLI can not be accessed via Telnet because it is an insecure protocol.

To get an overview of the commands type in the command help and you get an alphabetic list of all commands.

Please refer to Section 13.9, “TYPE SERVIF - Changing the Login and Password for the Service Access” on how to configure the access data for CLI.

The basic function of the CLI are described below. In the following sections the CLI commands are divided into seven categories: