Collapse AllExpand All

14.3.3.3.1. Native SIP Trunk Profiles Previous topic Parent topic Child topic Next topic

  1. SIP protocol variant for IP networking must be set to native SIP in AMO CGWB (parameter TRPRSIP).
  2. The use of SIP trunk profiles for native SIP trunking must be activated (default value) in the WBM.
  3. Call up:
    WBM > Configuration > Voice Gateway > SIP Trunk Profile Parameter > "Use Profiles for Trunks via Native SIP"

    Figure 243. Activating SIP trunk profiles

    sip_trunk_profile_01-2.PNG
    If the usage of profiles is enabled the menu SIP Trunk Profiles is visible in the WBM under voice gateway (see Section 3.3.4, “"SIP Trunk Profiles" menu”).
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.