Collapse AllExpand All

14.3.3.3.2. SIP-Q Trunk Profiles Previous topic Parent topic Child topic Next topic

  1. SIP protocol variant for IP networking must be set to SIP-Q in AMO CGWB (parameter TRPRSIPQ).
  2. By default, the SIP trunk profiles for SIP-Q are deactivated in the WBM. The use of SIP-Q trunk profiles must be activated in the WBM:
  3. WBM > Configuration > Voice Gateway > SIP Trunk Profile Parameter > Activate checkbox "Use Profiles for Trunks via SIP-Q"
    If the usage of profiles is enabled the menu SIP Trunk Profiles is visible in the WBM under voice gateway (see Section 3.3.4, “"SIP Trunk Profiles" menu”).
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.