7.3.6. Configuring the HG 3500 Directory Number 
Every HG 3500 requires a directory number with which it can be contacted
in the gatekeeper’s OpenScape 4000 system. The AMO CGWB presents the
directory number to the HG 3500 (command:
ADD-CGWB:MTYPE=CGW,LTU=<number>,SLOT=<number>,TYPE=LEGKDATA,GWDIRNO=<GW
directory number>;).A HG 3500 that has to register at a foreign OpenScape 4000 system
with gatekeeper does not have to have an entry its own OpenScape 4000
system’s digit analysis scheme. However, the directory number must
be configured under the GATEWAY digit analysis result or, if the number
contains more than six digits, in the LCR in the system with gatekeeper.
The DPLN entry for a remote HG 3500 at the OpenScape 4000 system with
gatekeeper requires the associated gateway number as supplementary information.
This is administered, that is, the relevant DPLN entry is entered or
deleted with the AMO GKREG in the course of configuration or deletion.
This ensures that operation can only start if the gateway is correctly
configured in the LEGK administration.
The HG 3500s own directory number must come from the station’s numbering
plan.
The gateway directory number must be configured under the TIE digit
analysis result (TSC connection) in a HG 3500 that has to register at
the local OpenScape 4000. A gateway number is not essential as supplementary
information in this case.
The DPLN entry for a HG 3500 (GATEWAY digit analysis result) can only
be deleted after the gateway number has been removed. Use the AMO GKREG
to delete the gateway from the LEGK administration.
Generation
AMO WABE
Configure the directory number of a remote HG 3500 in the local
system, that is, the gateway must register at the local LEGK. In this
case, the gateway must be configured with the GATEWAY digit analysis
result.
 |
Configuration can be performed with OpenScape
4000 Assistant/Manager in the Extension window (TYPE=GATEWAY).
|
 |
ADD-WABE:CD=35101,DAR=GATEWAY; For the predefined traffic situations, the remote gateway’s
directory number (35101) is configured as the gateway digit analysis
result in the digit analysis scheme.
|
Configure the directory number of a remote HG 3500 in the system with
gatekeeper, that is, the gateway can register at the local gatekeeper.
In this case, the gateway must be configured with the TIE digit analysis
result.
|
|
Configuration can be performed with OpenScape
4000 Assistant/Manager in the Extension window (TYPE=TIE).
|
|
|
ADD-WABE:CD=452001,DAR=TIE; For the predefined traffic situations, the local gateway’s
directory number (452001) is configured as the tie line digit analysis
result in the digit analysis scheme.
|
Display:
|
|
Configuration can be performed with OpenScape
4000 Assistant/Manager in the Extension window.
|
|
|
DISPLAY-WABE:GEN,Directory Number; The AMO outputs data on the specified directory number.
|
Delete:
|
|
Configuration can be performed with OpenScape
4000 Assistant/Manager in the Extension window.
|
|
|
DELETE-WABE:CD,Station Number,,Digit Analysis Result; The AMO deletes the required directory number for the
specified digit analysis result.
|