Collapse AllExpand All

14.7.4.1.1. Central settings in OpenScape 4000 Previous topic Parent topic Child topic Next topic

  • GATEKPR=YES from CHANGE-ZANDE:TYPE=ALLDATA is used in this document. If set to GATEKPR=NO the AMO CGWB looks slightly different. Either configuration of this parameter is fine.
  • In a HiPath 4000/OpenScape 4000, HiPath 3000 network we suggest to use the E.164 numbering for the complete network. Then please add the COT parameter NPIS to every digital trunk.
  • Settings for module in OpenScape 4000
  • For this example the trunking module is installed in location 1-2-4 (means LTG=1, LTU=2, SLOT=4).
${DocTitle}, ID: ${DocID}
© 03/2026 Mitel Networks Corporation. All rights reserved. Mitel and the Mitel logo are trademark(s) of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH & Co. KG. All other trademarks herein are the property of their respective owners.