15.1.2. Configuration 
OpenScape Mobile Pro Clients must be configured in an OpenScape 4000
system as UFIP SIP device. There is one UFIP SIP device per OpenScape
Mobile Pro Client user. This UFIP SIP device acts as a proxy for all
of the user’s OpenScape Mobile Pro Clients.The UFIP SIP is an auxiliary
device therefore it’s number is not presented on any phone display
and known only by the system administrator.
OSMO Pro licenses are required to configure OSMO Pro clients. A OSMO
Pro user needs one flexlicense for the deskphone and one OSMO Pro license
for the clients. (if a user wants to run the client on multiple smartphones/tablets
in parallel only one OSMO Pro license is needed).
Direct calls to UFIP SIP devices are not possible. The OpenScape Mobile
Pro Clients are reachable with the user’s OpenScape 4000 Deskphone
number. The users Deskphone ONS number is linked to the auxiliary UFIP
SIP device via AMO SBCSU (see below for configuration example).
“Regular” SIP endpoints and UFIP OpenScape Mobile Pro Clients
can be configured in parallel on a gateway board.
INFO:
Background architecture information of a OpenScape Mobile Pro Client
registration process: the OpenScape Mobile Pro Client uses the ONS deskphone
phone number for a dummy registration as soon as the OpenScape Mobile
Pro Client logs in to its OpenScape Mobile Pro Client application. The
data needed to register the client with the gateway ( auxiliary UFIP
SIP phone number etc ) are sent to the Client via CSTA over SIP. Once
the Client has received all this data it registers as a SIP client with
the GW . After successful registration the Client is in service.
INFO:
For UFIP SIP Clients capabilities see Section , “SIP Subscriber”.
The Clients must also be linked to the user’s desktop phone via
administration. (AMO SBCSU, parameter CLNTDESK).
The clients must be configured as OSMO Pro clients (AMO SBCSU parameter
OSMO = YES)
For Mobile Pro clients the user’s mobile phone number can be assigned
to the client as a configurable option (AMO ZIEL).
Additional parameters for OSMO Pro are configured with AMO ZANDE branch
OSMO. These parameters are sent to the OSMO Pro client when the user
logs on.
- SERVMAIL Email address for customer service
- OSVTLS Level of Certificate Security Check Gateway (0=no check, 1=check)
- SBCSTLS SBC Level of Certificate check (0=no check, 1=check)
- QOSVIDEO Quality of service for video (0..254)
- DSCPTOS enable/disable DSCPTOS (yes, no)
- WMM enable/disable wireless multi media (yes, no)
- SECOSV Media security mode gateway (rtp, srtp, best effort)
- SECOSBC Media security mode SBC (rtp, srtp, best effort)
- FEATLIST OSMO Pro feature list. Please use Parameter ALL to set all
of them. In case there are problems with certain features like the MOVE
Button then delete feature SST from the list and the MOVE button is greyed
out.
- Call Forwarding CF
- Single Step Transfer SST
- TransferONHold TOH
- HandoverFrom HF
- Sip Over Data Connection SIP
- Seamless Handover SEHO
- Extended Alerting XA
- Consultation Call CSC
- Snooze DnD SDND
- VCPRIO1 preferred Video Codec (VP8 or H264)
- VCPRIO2 alternative Video Codec (VP8 or H264)
- SBCFQDN1-5 SBC Fully qualified domain name
- SBCADDR1-5 SBC IP address
- PORT1-5 SBC PORT