18.3.6.3.1. Scenario 1: Activate a OpenScape 4000 SoftGate on a host system
that already has SPE activated 
IMPORTANT:
Please note the sequence!
IMPORTANT:
Don't start the OpenScape 4000 SoftGate because
it will fail!
- Use the SPE administration in OpenScape 4000 Assistant and update the board list to
see your new
OpenScape 4000 SoftGate.
Expert Mode > Gateway Manager > SPE
- Configure a MEK manually for this OpenScape 4000 SoftGate. This will transmit the MEK to
the RMX.
Expert Mode > Gateway Manager > SPE
- Use the “OpenScape 4000 Platform Administration (Portal)” to configure the MEK.
IMPORTANT:
Since SPE is active in the system, the OpenScape 4000 SofGate will not be able to connect unless it has the correct MEK. WBM (for the distribution of a MEK) can’t be used till the OpenScape 4000 SofGate connects successfully to the host system. - Now you can start up the OpenScape 4000 SoftGate.