13.4. Relevant AMOs 
Table 75. AMO APRT parameters in ADD branch under TYPE=SURV, CONF=ROUTER
|
AMO
|
Parameter
|
Sprache/ Language
|
Beschreibung/ Description
|
|
APRT
|
ROUTERNR
|
d
|
Nummer des Routers für Signaling Survivability.
IPDA unterstützt bis zu 10 Survivability Router, welche von 1..10
durchnummeriert und über diesen Index verwaltet werden.
|
|
ROUTERNO
|
e
|
Number of the Router for Signaling Survivability.
IPDA
supports up to 10 survivability routers, numbered 1..10 which are administered
using this index.
|
|
|
LSADR
|
d
|
IP-Adresse eines Routers für Signaling Survivability
im OpenScape 4000 LAN Segment.
Diese IP-Adresse muss zum OpenScape
4000 LAN Segment gehören (siehe IP Distributed Architecture > Parameter
NETADR im AMO SIPCO, Table
1 “AMO SIPCO parameters in ADD branch or for CHANGE under TYPE=LSNET”)
|
|
|
LSADDR
|
e
|
IP Address of a Router for Signaling Survivability
in the OpenScape 4000 LAN Segment.
This IP address must belong
to the OpenScape 4000 LAN Segment (see IP Distributed Architecture >
parameter NETADDR in AMO SIPCO, Table
1 “AMO SIPCO parameters in ADD branch or for CHANGE under TYPE=LSNET”)
|
Table 76. AMO APRT parameters in ADD branch under TYPE=SURV, CONF=AP
|
AMO
|
Parameter
|
Sprache/ Language
|
Beschreibung/Description
|
|
APRT
|
ROUTERNR
|
d
|
Nummer des Routers für Signaling Survivability.
Bestimmt einen der bis zu 10 Survivability Router, über den dieser
Access Point erreicht werden soll.
|
|
ROUTERNR
|
e
|
Number of the Router for Signaling Survivability.
Selects
one of the up to 10 survivability routers, via which this Access Point
shall be reached.
|
|
|
SURVTYP
|
d
|
MODEM = Signaling Survivability über Modem
SURVLAN
= Signaling Survivability über alternatives LAN
|
|
|
SURVTYPE
|
e
|
MODEM = Signaling survivability via Modem
SURVLAN
= Signaling survivability via alternate LAN
|
Table 77. AMO UCSU parameter in ADD/CHANGE branch under UNIT=AP
|
AMO
|
Parameter
|
Sprache/ Language
|
Beschreibung/Description
|
|
UCSU
|
SIGMODE
|
d
|
HSRTCP: HSR über TCP-Verbindung
HSRUDP:
HSR über UDP-Verbindung
|
|
SIGMODE
|
e
|
HSRTCP: HSR via TCP connection
HSRUDP:
HSR via UDP connection
|