4. Using Voice-Only Configuration 
The Voice-Only OpenScape Mobile Pro V10 configuration is connected to OpenScape Voice via SBC. In this configuration your OpenScape Mobile Pro application is not connected to the Façade Server. This means, that you can not use the UC features that are available in OpenScape Mobile Pro Integrated and UC-Only configurations like access to UC contacts, Call History list etc.
In the Voice-Only configuration you have three main tabs in your navigation bar:
-
Call History
-
Contacts
-
User
-
Settings
In the Voice-only mode you can initiate calls over Wi-Fi or Cellural Network. You
can also use
Voicemail messages, move calls, transfer calls and handle the rest of the call
features, available in OpenScape Mobile Pro V10.
When you are not in OpenScape Mobile Pro or your device is locked, incoming OpenScape
Mobile Pro
calls are shown up on your device just like standard, cellular calls. When an
OpenScape Mobile pro call comes in, your Android device call screen appears. You
can answer the call using the standard call controls without needing to unlock
your device. If you want to go to the OpenScape Mobile client from the call
screen, click on the OpenScape Mobile Pro V10 icon and then unlock your phone
when prompted.
If you leave the OpenScape Mobile Pro application while you are on an OpenScape Mobile
Pro V10 call, you can retrieve it from the android notification area in order to return
to it just like standard, cellular phone calls.