37.2.1 ADD-BUEND

This action creates a new empty trunk group, that means makes memory available and initializes this memory.


Command Code	Parameter
ADD-BUEND	[TGRP=<number>] ,[NAME=<string>]
	, NO=<number>
	,[TRACENO=<number>],[ACDTHRH=<number> or *]
	,[PRIONUM=<number>],[GDTRRULE=<number>]
	,[TDDRFLAG=<param>],[ACDPMGRP=<number>];

If no number is entered for TGRP, the new trunk group is assigned to the first free trunk group number (the number of possible trunk groups is limited to 512).
The size of the memory for a trunk group is determined by parameter NO, which specifies the maximum number of trunks that can be allocated to the trunk group.
During creation, the name associated with the trunk group (parameter NAME) is entered into the name table and also the maximum number of trunks in a trunk group that can be call traced (parameter TRACENO), the number of trunks that can handle ACD calls (parameter ACDTHRH) the priority class (PRIONUM) , general digit translation rule (GDTRRULE), traffic dependent dynamic routing (TDDRFLAG) and the ACD phone mail group number are set.

Existence of the entered GDTRRULE is checked before assigning it to the trunk group. GDTRRULE is added by means of AMO-DNIT.

Validity of ACDPMGRP is also checked before assigning it to the trunk group.

Example

Create a new trunk group for two DIU-S2 trunks (60 B-channels) with the name "CO". The next available free trunk group has to be searched by AMO.

Input:

ADD-BUEND:NAME="CO",NO=60;

Output:

H01: ADD TGRP 47 COMPLETED

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.