47.3.1
START-CMP
Starts the compare; either two files are compared or two entire program systems, with one program system being on the load area :PDS: on the hard disk and the other on a delivery directory on the hard disk coming from the production.
A direct compare of two load areas with TYPE=PS is not supported.
Delivery directorys on the hard disk could be generated by means of the AMOs DUMP-
APS
or START-
BACK
, or by means of PCHI or FT.
The name of the delivery directory is freely optional and in this description „:SCR:DD/“ is used as name of the delivery directory.
In the event that there are two DIR files on the delivery directory, both program systems are compared.
The parameter VOLNAME is not necessary for delivery directorys on the hard disk.
Procedure Overview
Command Code
Parameter
START-CMP
[ANS=<string>],[VOLNAME=<string>]
|,[TYPE=SGL],FILENA1=<string>,FILENA2=<string>
|,[TYPE=PS];
Examples
1.
Compare two program systems
Input:
START-CMP:,":SCR:DD/",PS;
2.
Compare two files
Input:
START-CMP:,,SGL,":SCR:DD/ZODBIOS0.02.017",":PDS:APSZ/ADM/DP/ABS/ZODBIOS0";
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.