66.2.2 CHANGE-DCIC

The function CHANGE-DCIC can be used to change the STNO of DCIs.

If the PEN is to be changed, the DCI must first be deleted and then reassigned at the new port.

Only DCIs that were previously deactivated by means of the switch-AMO DSSU can be changed. After the change is completed, the DCI can be activated again by the switch AMO using "activation with loading".

Procedure Overview


Command Code	Parameter
CHANGE-DCIC	PEN=<gg-uu-sss-cc>,STNO=<number>;

Example

Change the associated telephone of the DCI at PEN 1-1-1-0 from 2101 to 2110.

Input:

CHA-DCIC:1-1-1-0,2110;

Output:

CHANGE-DCIC:1-1-1-0,2110;

H06: DCI CHANGED AT PEN 01-01-001-00

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.