66.2.3 DELETE-DCIC

Using the function DELETE, the static data from assigned DCIs are cancelled and the device table memory is returned to the system.
Only DCIs that were previously deactivated by means of AMO DSSU can be deleted.
Only the PEN of the DCI need be specified to cancel this DCI. If a PEN range is specified, a search is made for DCIs. The PENs of the cancelled DCIs and the DCIs that cannot be cancelled are output.

Procedure Overview


Command Code	Parameter
DELETE-DCIC	PEN1=<gg-uu-sss-cc>,[PEN2=<gg-uu-sss-cc>];

Example

Cancel all DCIs at PENs 1-1-1-0 to 1-4-1-0.

Input:

DEL-DCIC:1-1-1-0,1-4-1-0

Output:

DELETE-DCIC:1-1-1-0,1-4-1-0

H05 : DCI AT PEN 1-1-1-3 COULD NOT BE DELETED BECAUSE IT MUST BE
DEACTIVATED

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.