76.2.2 DISPLAY-DIMSU

Each parameter has three status values. These are as follows:
•
ACTUAL
•
USED
•
MAX-USED
The value ACTUAL defines the number of storage elements allocated and is changed using the action ADD.
 
NOTE:  Exception, parameter COS, LODR, LROUT and LRTPROF: The number of the created class of service, the outdial rule for least cost routing, the LCR route element or the routing profile is equivalent to the index of the memory location. (e.g. If creating COS 1, 200 and 400 with AMO COSSU, the ACTUAL value of the DIMSU parameter COS must be at least 400.)
The value USED describes the number of used memory elements. A comparison with the ACTUAL value shows how much of the allocated memory is still unused and can be used for creating devices and/or features.
The value MAX-USED describes the index of largest storage elements used. A comparison with the ACTUAL value shows how much of the allocated memory is still free, and can be reallocated.
The reduction of the memory entries to MAX-USED can be carried out in the case of a memory shortage, if, during operation, it is seen that ACTUAL > MAX-USED. The reduction of the memory entries to a value lower than MAX-USED is only possible if the USED value is 0.
Each further AMO which configures elements from the allocated memory pool, changes the administration data USED and MAX-USED.
When deleting devices or features, MAX-USED is not changed.
The database contains the maximum values and default values for each parameter depending on the capacity configuration of the system. These values can be interrogated using the DISPLAY branch of the AMO.
Procedure Overview
 
Command Code
Parameter
DISPLAY-DIMSU
[TYPE=ALL],[PARAM=<param>];
 
 
 
|[TYPE=BASIC];
 
 
 
|[TYPE=USER];
 
 
 
|[TYPE=NETWORK];
 
 
 
|[TYPE=APPLICAT];
 
 
 
|[TYPE=SYSTEM];
The branch-off parameter is optional.
Examples of different display outputs:
1.
Display all parameters arranged in groups.
Input:
DISPLAY-DIMSU;
Output:
DISPLAY-DIMSU;
H500: AMO DIMSU STARTED
+------------------------------------------------------------+
| MAX- SYS- |
| USED USED ACTUAL | STD MAX |
| CCIDXS : zzzzz yyyyy xxxxx | sssss mmmmm |
| CCIDXD : ..... ..... ..... | ..... ..... |
| GPIDX : ..... ..... ..... | ..... ..... |
| LINES : ..... ..... ..... | ..... ..... |
| PORTS : ..... ..... ..... | ..... ..... |
+------------------------------------------------------------+
| STATIONS: |
| STN : zzzzz yyyyy xxxxx | sssss mmmmm |
| |
| TERMINALS: |
| BUS : zzzzz yyyyy xxxxx | sssss mmmmm |
| OPTCC : ..... ..... ..... | ..... ..... |
| OPTEXP : ..... ..... ..... | ..... ..... |
| ATND : ..... ..... ..... | ..... ..... |
| ES : ..... ..... ..... | ..... ..... |
| ESSTN : ..... ..... ..... | ..... ..... |
| S2PP : ..... ..... ..... | ..... ..... |
| AUXDIGI : ..... ..... ..... | ..... ..... |
| |
| TRUNK AND TIE-LINE CIRCUITS: |
| PRI : zzzzz yyyyy xxxxx | sssss mmmmm |
| TRK : ..... ..... ..... | ..... ..... |
| CRCP : ..... ..... ..... | ..... ..... |
| |
| DIAL PLAN: |
| DPLNCD : zzzzz yyyyy xxxxx | sssss mmmmm |
| DPLNGR : ..... ..... ..... | ..... ..... |
| |
| DEVICE SEARCH: |
| RTE : zzzzz yyyyy xxxxx | sssss mmmmm |
| MG : ..... ..... ..... | ..... ..... |
| SG : ..... ..... ..... | ..... ..... |
| ATNDGR : ..... ..... ..... | ..... ..... |
| HT : ..... ..... ..... | ..... ..... |
| HTCQB : ..... ..... ..... | ..... ..... |
| |
| CALL PROCESSING: |
| CPB : zzzzz yyyyy xxxxx | sssss mmmmm |
| SILI : ..... ..... ..... | ..... ..... |
| COSTI : ..... ..... ..... | ..... ..... |
| |
| DERIVED PARAMETERS: |
| LODEN : zzzzz yyyyy xxxxx | sssss mmmmm |
| SU : ..... ..... ..... | ..... ..... |
| NWBCHL : ..... ..... ..... | ..... ..... |
| LODS0 : ..... ..... ..... | ..... ..... |
| LODTMD : ..... ..... ..... | ..... ..... |
| CPDBUF : ..... ..... ..... | ..... ..... |
| DTILTG : ..... ..... ..... | ..... ..... |
| DTITMD : ..... ..... ..... | ..... ..... |
| |
| SUBSCRIBER FEATURES: |
| NAME : zzzzz yyyyy xxxxx | sssss mmmmm |
| EXTNAME : ..... ..... ..... | ..... ..... |
| ORG : ..... ..... ..... | ..... ..... |
| COS : ..... ..... ..... | ..... ..... |
| SPDI : ..... ..... ..... | ..... ..... |
| SPDCL : ..... ..... ..... | ..... ..... |
| SPDCD : ..... ..... ..... | ..... ..... |
| CBK : ..... ..... ..... | ..... ..... |
| REMIND : ..... ..... ..... | ..... ..... |
| PUGR : ..... ..... ..... | ..... ..... |
| ID : ..... ..... ..... | ..... ..... |
| PINBUF : ..... ..... ..... | ..... ..... |
| CFWDEST : ..... ..... ..... | ..... ..... |
| CFWHIST : ..... ..... ..... | ..... ..... |
| HGMEMB : ..... ..... ..... | ..... ..... |
| CUGPROF : ..... ..... ..... | ..... ..... |
| LIN : ..... ..... ..... | ..... ..... |
| ALTROUT : ..... ..... ..... | ..... ..... |
| LCRCOS : ..... ..... ..... | ..... ..... |
| HOTDEST : ..... ..... ..... | ..... ..... |
| |
| DIGITE FEATURES: |
| DSS : zzzzz yyyyy xxxxx | sssss mmmmm |
| DSSNA : ..... ..... ..... | ..... ..... |
| KEYSYS : ..... ..... ..... | ..... ..... |
| CALLOG : ..... ..... ..... | ..... ..... |
| COMGR : ..... ..... ..... | ..... ..... |
| SLKTEXT : ..... ..... ..... | ..... ..... |
| CALLOGS : ..... ..... ..... | ..... ..... |
| |
| ATTENDANT CONSOLE FEATURES: |
| ATNDCQ : zzzzz yyyyy xxxxx | sssss mmmmm |
| NSTN : ..... ..... ..... | ..... ..... |
| |
| TRUNK FEATURES: |
| MFCVAR : zzzzz yyyyy xxxxx | sssss mmmmm |
| DSPMOD : ..... ..... ..... | ..... ..... |
| DPDSPMOD: ..... ..... ..... | ..... ..... |
| LDPLN : ..... ..... ..... | ..... ..... |
| LDPLNC : ..... ..... ..... | ..... ..... |
| LODR : ..... ..... ..... | ..... ..... |
| LROUT : ..... ..... ..... | ..... ..... |
| LRTPROF : ..... ..... ..... | ..... ..... |
| LCRDSR : ..... ..... ..... | ..... ..... |
| SYNAN : ..... ..... ..... | ..... ..... |
| FORMTAB : ..... ..... ..... | ..... ..... |
| VOICO : ..... ..... ..... | ..... ..... |
| |
| NETWORK FEATURES: |
| BLK100 : zzzzz yyyyy xxxxx | sssss mmmmm |
| RSTCON : ..... ..... ..... | ..... ..... |
| TEAMCONN: ..... ..... ..... | ..... ..... |
| DSS1SCRD: ..... ..... ..... | ..... ..... |
| DSS1SCRP: ..... ..... ..... | ..... ..... |
| REMPUGR : ..... ..... ..... | ..... ..... |
| PARTNODE: ..... ..... ..... | ..... ..... |
| LDPLN1 : ..... ..... ..... | ..... ..... |
| LDPLN2 : ..... ..... ..... | ..... ..... |
| LDPLN3 : ..... ..... ..... | ..... ..... |
| LDPLN4 : ..... ..... ..... | ..... ..... |
| LDPLN5 : ..... ..... ..... | ..... ..... |
| LDPLN6 : ..... ..... ..... | ..... ..... |
| LDPLN7 : ..... ..... ..... | ..... ..... |
| LDPLN8 : ..... ..... ..... | ..... ..... |
| LDPLNC1 : ..... ..... ..... | ..... ..... |
| LDPLNC2 : ..... ..... ..... | ..... ..... |
| LDPLNC3 : ..... ..... ..... | ..... ..... |
| LDPLNC4 : ..... ..... ..... | ..... ..... |
| LDPLNC5 : ..... ..... ..... | ..... ..... |
| LDPLNC6 : ..... ..... ..... | ..... ..... |
| LDPLNC7 : ..... ..... ..... | ..... ..... |
| LDPLNC8 : ..... ..... ..... | ..... ..... |
| |
| DATA FEATURES: |
| APPL : zzzzz yyyyy xxxxx | sssss mmmmm |
| ECCS : ..... ..... ..... | ..... ..... |
| DCIPAR : ..... ..... ..... | ..... ..... |
| WSPROT : ..... ..... ..... | ..... ..... |
| INFO : ..... ..... ..... | ..... ..... |
| |
| ACD FEATURES: |
| ACDAGT : zzzzz yyyyy xxxxx | sssss mmmmm |
| ACDGRP : ..... ..... ..... | ..... ..... |
| ACDLOGON: ..... ..... ..... | ..... ..... |
| ACDPRIM : ..... ..... ..... | ..... ..... |
| ACDCQ : ..... ..... ..... | ..... ..... |
| ACDRCG : ..... ..... ..... | ..... ..... |
| ACDRT : ..... ..... ..... | ..... ..... |
| ACDRTX : ..... ..... ..... | ..... ..... |
| ACDSHIFT: ..... ..... ..... | ..... ..... |
| ACDMONID: ..... ..... ..... | ..... ..... |
| ACDCALEN: ..... ..... ..... | ..... ..... |
| GDTR : ..... ..... ..... | ..... ..... |
| DNI : ..... ..... ..... | ..... ..... |
| DPDNI : ..... ..... ..... | ..... ..... |
| GENBUF : ..... ..... ..... | ..... ..... |
| |
| CAPACITY STAGE CONFIGURATION: |
| PERMDL : zzzzz yyyyy xxxxx | sssss mmmmm |
| CRICC : ..... ..... ..... | ..... ..... |
| WAML1 : ..... ..... ..... | ..... ..... |
| WAML2 : ..... ..... ..... | ..... ..... |
| STMA : ..... ..... ..... | ..... ..... |
| STMACIR : ..... ..... ..... | ..... ..... |
| STMI : ..... ..... ..... | ..... ..... |
| STMIHFA : ..... ..... ..... | ..... ..... |
| STMIHFA2: ..... ..... ..... | ..... ..... |
| STMI2IGW: ..... ..... ..... | ..... ..... |
| SLC24 : ..... ..... ..... | ..... ..... |
| AP : ..... ..... ..... | ..... ..... |
| GWREG : ..... ..... ..... | ..... ..... |
| SCTPATH : ..... ..... ..... | ..... ..... |
| CCAP : ..... ..... ..... | ..... ..... |
| APEGRP : ..... ..... ..... | ..... ..... |
| |
+------------------------------------------------------------+
AMO-DIMSU-170 DIMENSIONING OF FEATURES, SWITCHING UNIT
DISPLAY COMPLETED;
2.
Display all parameters of branch SYSTEM.
Input:
DISPLAY-DIMSU:SYSTEM;
Output:
DISPLAY-DIMSU:SYSTEM;
H500: AMO DIMSU STARTED
+------------------------------------------------------------+
| MAX- SYS- |
| USED USED ACTUAL | STD MAX |
| CCIDXS : zzzzz yyyyy xxxxx | sssss mmmmm |
| CCIDXD : ..... ..... ..... | ..... ..... |
| GPIDX : ..... ..... ..... | ..... ..... |
| LINES : ..... ..... ..... | ..... ..... |
| PORTS : ..... ..... ..... | ..... ..... |
+------------------------------------------------------------+
| CAPACITY STAGE CONFIGURATION: |
| PERMDL : zzzzz yyyyy xxxxx | sssss mmmmm |
| CRICC : ..... ..... ..... | ..... ..... |
| WAML1 : ..... ..... ..... | ..... ..... |
| WAML2 : ..... ..... ..... | ..... ..... |
| STMA : ..... ..... ..... | ..... ..... |
| STMACIR : ..... ..... ..... | ..... ..... |
| STMI : ..... ..... ..... | ..... ..... |
| STMIHFA : ..... ..... ..... | ..... ..... |
| STMIHFA2: ..... ..... ..... | ..... ..... |
| STMI2IGW: ..... ..... ..... | ..... ..... |
| SLC24 : ..... ..... ..... | ..... ..... |
| AP : ..... ..... ..... | ..... ..... |
| GWREG : ..... ..... ..... | ..... ..... |
| SCTPATH : ..... ..... ..... | ..... ..... |
| CCAP : ..... ..... ..... | ..... ..... |
| APEGRP : ..... ..... ..... | ..... ..... |
| |
+------------------------------------------------------------+
AMO-DIMSU-170 DIMENSIONING OF FEATURES, SWITCHING UNIT
DISPLAY COMPLETED;
3.
Display a single parameter.
Input:
DISPLAY-DIMSU:PARAM=STN;
Output:
DISPLAY-DIMSU:PARAM=STN;
H500: AMO DIMSU STARTED
+------------------------------------------------------------+
| MAX- SYS- |
| USED USED ACTUAL | STD MAX |
+------------------------------------------------------------+
| STN : zzzzz yyyyy xxxxx | sssss mmmmm |
+------------------------------------------------------------+
AMO-DIMSU-170 DIMENSIONING OF FEATURES, SWITCHING UNIT
DISPLAY COMPLETED;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.