COSSU - Classes of Service

This AMO is used to add, change, delete or display Classes of Service (COS). It is relevant to functional devices.

The classes of service contain combinations of authorizations and features and are assigned to one ore more stations (AMO-ACSU, AMO-SBCSU, AMO-SCSU resp. AMO-SSCSU). Classes of service are also assigned to trunks for call traffic (AMO-TACSU, AMO-TDCSU resp. AMO-TSCSU).

Each class of service is divided into 3 services:

Voice (VCE)
Facsimile (FAX)
Data Terminal (DTE)

Table 1 shows the COS authorizations, a description of the authorization, the service in which each authorization is applicable, and whether an autorization effects a station and/or a trunk. This table is only a compilation of classmarks. It does not allow you to establish cross-references between the different authorizations.

The -without direct trunk access- and -without tie trunk access- authorizations for the specified service are indicated by the fact that the direct trunk access and tie trunk access authorizations are not set for the corresponding service.

COS 0 is not a valid class of service.

LCR classes of service

Change, display, and regenerate LCR classes of service, each with up to 64 LCR authorizations and LCR options (for example, LCR expensive route tone).

Sixty-four LCR classes of service are permanently configured, 32 of which are for voice, fax, and 32 of which are for data.

LCOSV=1 is initialized for the attendant console with all the authorizations. The others are initialized without contents and edited by means of the branch CHANGE.

For the release control, rering and automatic override

China features, three voice authorizations (RELCON, RERING, AUTOV) have been introduced as well as the external classes of service COEX 1-16 (Class of External), which are assigned to both the internal and the external station in the system. In addition to the three authorizations listed above, these COEX contain all the authorizations of the standard COS.

By means of
AEND COSSU:TYPE=COEX,COEX= < number >,COS= < number >;
the max. 16 COEX are assigned to a configured COS containing the corresponding authorizations. One of the 16 COEX with the value COEX in the COS1 and COS2 (AMO SBCSU/SCSU/SSCSU) is assigned to the internal station. For incoming traffic, the pertinent authorizations of the external station are transferred by means of MFC signaling and translated to COEX (1-16) in the system in the MFC tables (AMO-MFCTA).

Table 1: COS Authorizations

Authorization	Description	Service			Application
Authorization	Description	VCE	FAX	DTE	Station	Trunk
General Classmarks
ACTMAN	Manual CDR Account Code possible	x	x	x	x
ANSYN	Announcements with synchronized start of text	x			x
AHOT	Application hotline	x			x
ATRACE	Automatic station number identification	x			x
BASIC	Basic device authorization		x	x	x
BDCP	Disable selective call pickup	x			x
COIN	Coinbox telephone	x
COSXD	Class-of-service changeover with code	x			x
CTLS	Selective trunk and station dialing	x				x
DATA	Non-voice data authorization	x			x
DICT	Dictation authorization	x			x
DSSKEY	KEY functionality with DSS key	x			x
DPSTN	Dial pulsing	x	x	x		x
DSM	Access to service module (DTE)			x	x
DNDOVR	Override do not disturb	x			x
DIDBLK	DID barring	x	x	x	x
FAX	Access to service module (FAX)		x		x
GRPCAL	Group call	x			x
HGICLD	Hunt group code in call party number	x	x	x	x
HOT	Hotline	x		x	x
INATCP	International call in private network	x	x	x	x
LOCCPV	Local connection in private network	x	x	x	x
MANOV	Manual override	x			x
MB	Mailbox (authorization to read mail)	x			x
MTRACE	Manual station number identification	x			x
NOARNO	Ports to which recall is not permitted	x			x
NOCHRG	Without call charges	x	x	x
NOPTCD	Change night service variant of an AC group via code	x			x
NPINDP	No pin for dailing pattern required	x			x
OFHKRC	Off hook recall	x			x
PINAFM	PIN Identification and Follow-Me in one step	x			x
RKOABS	Absolute override/camp-on security	x			x
REVCHA	Reception of a collect call	x
RSVLN	Access to reserved trunks	x				x
SPKR	Loudspeaker announcement authorization	x
SUBEPP	Consulting party is responsible for call charges	x
SUTVA	Station can transfer before answer	x			x
TOLLPV	National call in private network	x	x	x	x
TRACE	Automatic call trace	x			x
TRANSG	Indirect access to private network	x
TTT	Transfer Trunk to Trunk (required for CO to CO)	x	x	x	x
VCE	Access to service module (Voice)	x			x
General Country-Specific Authorizations
PRCO	External party with priority	x
PRCO1	External party 1 with priority	x
PRISTN	Station with priority	x
TSUID	External party identification	x	x	x	x
Call Forwarding
CFB	Call forwarding on busy	x			x
CFNR	Call forwarding on no reply	x			x
CFSWF	Automatic changeover to fixed call forwarding after deactivating variable call forwarding	x			x
FWDBAR	Prevent call forwarding	x			x
FWDECA	CF-EXT as a function of COS 1 / 2	x			x
FWDEXT	Extended call forwarding	x
FWDNWK	Call forwarding to exchange	x
Emergency Override/Emergency Disconnect
AOBTR	Autom. emergency override to busy trunk	x			x
REOVR	Rejection of emergency override/disconnect	x			x
Direct Trunk Access and Tie Trunk Access Authorizations
NOCO	Without direct trunk access	x	x	x	x
RTA	Restricted trunk access	x	x	x	x
TA	Unrestricted toll access authorization	x	x	x	x
NOTIE	Without tie trunk access	x	x	x	x
RTIEA	Restricted tie trunk access	x	x	x	x
TTCR1	Partial tie trunk access authorization 1	x	x	x		x
TTCR2	Partial tie trunk access authorization 2	x	x	x		x
TTCR3	Partial tie trunk access authorization 3	x	x	x		x
TTCR4	Partial tie trunk access authorization 4	x	x	x		x
TTCR5	Partial tie trunk access authorization 5	x	x	x		x
TTCR6	Partial tie trunk access authorization 6	x	x	x		x
TNOTCR	Tie trunk access authorization	x	x	x	x	x
EURO-ISDN Terminals
MSN	Multiple Subscriber Number	x	x	x	x
MULTRA	Multi-Trans (called terminal seized several times)	x	x	x	x
OVCAT	Override category	x	x	x	x
SPECAR	Special arrangement	x	x	x	x
SUBCAL	B is notified of A station number	x	x	x	x
SUBDB	B is notified of default B station number	x	x	x	x
SUBMSN	B is notified of MSN	x	x	x	x
Services on DSS1 - Multi-Device Connection
CCBS	Completion of calls to busy subscribers	x	x	x	x
COLR	Connected line identification restriction	x	x	x	x
CW	Call waiting	x			x
MCIDA	Malicious Call Identification - automatic	x	x	x
MCIDM	Malicious Call Identification - manual	x	x	x
TP	Subscriber not in call pickup group	x
UUS1IM	Implicit use of UUS1 service	x	x	x
UUS3	Use of UUS3 service	x	x	x
QSIG + DSS1 to the Public Exchange
FWDBAS	Call forwarding programmed by another subscriber	x	x	x	x
FWDDIR	Activation, deactivation and display of incoming call forwarding	x	x	x		x
FWDFAS	Call forwarding programmed for another subscriber	x	x	x	x
KIESIG	Keypad IE signaling possible	x	x	x		x
Call Charge Identification for Data Selection
CDRATN	Call detail recording at attendant console	x			x
CDRC	Call detail recording central	x
CDRINT	Call detail recording of internal calls	x	x	x	x
CDRSTN	Call charge display during the call	x	x	x	x	x
CDRS	Call detail recording per station	x			x
Features for Public Telephones with Metering Pulses (these class marks can be released on a country specific basis only)
MTEQ	Maintenance equipment	x
PUPHON	Public telephone	x
SCRNCA	Station with no charge party A	x
SCRNCB	Station with no charge party B	x
SCRSPC	Station with special call detail recording	x
China
AUTOV	Automatic override	x			x
RECOIG	Ignore release control	x				x
RELCON	Release control	x				x
RERING	Ring back	x				x
Spain
CDRIND	Individual call detail recording	x	x	x	x
INATC	International call	x			x
LOCC	Local call	x			x
LOCCNV	Local data call	x			x
LSVC	Local service	x			x
NATC	National call	x			x
NSVC	National service	x			x
TESTEQ	Test equipment	x			x
TOLLC	Toll call	x			x
TOLLOP	Toll operator	x			x
ANI Outgoing GUS
ANICT	Malicious call tracing	x				x
ANITC	Issuing bills for toll calls	x				x
ANIPS	Issuing bill for services	x				x
ANISS	Information about special station features	x				x
GUS Stages 2&3
MFPAIC	Automatic international calls	x				x
MFPIAC	Intrazone call access code 2	x				x
MFPSIC	Semiautomatic dialing for international call	x				x
MFPSTC	Domestic toll call access code ABC	x				x

Cross Reference to Other AMOs:

AMO ACSU	:	Attendant Consoles
AMO BERUM	:	Class of service changeover
AMO BERUZ	:	Class of service changeover times
AMO COT	:	Class of trunk
AMO DIMSU	:	Memory allocation
AMO FEASU	:	Feature flags
AMO LDPLN	:	Dialing patterns for LCR
AMO MFCTA	:	MFC tables
AMO SBCSU	:	Subscribers with digital stations and S0 bus
AMO SCSU	:	Subscribers with analog stations
AMO SSCSU	:	Special subscribers
AMO TACSU	:	Analog trunks
AMO TDCSU	:	Digital trunks
AMO TSCSU	:	Special trunks
AMO ZAND	:	Central system data

Destination Processor: BP (Switching Unit)

Functions

ADD	Add a Class of Service	password class 2
CHANGE	Change of Classes of Service	password class 2
DELETE	Delete Classes of Service	password class 2
DISPLAY	Display Classes of Service	password class 0
REGENERATE	Regenerate Classes of Service	password class 2

Procedure Overview

ADD-COSSU

ADD-COSSU

[COPYCOS=<number>], [NEWCOS=<number>], [AVCE=<param>], [AFAX=<param>], [ADTE=<param>], [DVCE=<param>], [DFAX=<param>], [DDTE=<param>], [COEX=<number>], [INFO=<string>];

This operation is used to add a new class of service (COS). The LCR classes of service for voice and fax (LCOSV) and for data (LCOSD) are permanently configured, just as the COEX table. Therefore a LCOSV, LCOSD or COEX can neither be created nor deleted, but only be changed.

A COS can be added in several different ways:

1. Add a new COS while specifying the COS number

2. An existing COS is copied (parameter COPYCOS) and modified at the same time

3. Add a new COS without specifying the COS number and without specifying a COS to be copied. Only the selected authorizations are specified.

4. Add an empty COS.

5. Assign an external COS (COEX).

If the number of the new COS (parameter NEWCOS) is not specified, then the first number that is still unused will be automatically assigned.
Classmarks are inserted by means of the parameters AVCE, AFAX and ADTE resp. deleted by means of the parameters DVCE, DFAX and DDTE. In a single command the parameters for adding and deleting classmarks must not contain identical values. An empty COS (with the classmarks NOCO and NOTIE for all services) is created if no values are entered for the parameters COPYCOS, AVCE, AFAX and ADTE.

Examples:

1. Add a new COS (see item 3.) with the voice authorizations HOT, CDRS, TRACE and the fax authorization BASIC.

Input:

ADD-COSSU:AVCE=HOT&CDRS&TRACE,AFAX=BASIC;

Output:

H04: THE NUMBER OF THE CLASS OF SERVICE ADDED IS 27.

2. Add a COS by copying COS 23 (see item 2b.) and inserting the new authorization CDRS.

Input:

ADD-COSSU:COPYCOS=13,AVCE=CDRS;

Output:

H04: THE NUMBER OF THE CLASS OF SERVICE ADDED IS 28.

3. Add COS 30 by copying COS 1 and assigning the external class of service COEX 5

Input:

ADD-COSSU:COPYCOS=1,NEWCOS=30,COEX=5;

Output:

H04: THE NUMBER OF THE CLASS OF SERVICE ADDED IS 30.

Possible Error Messages:

 
F05 (no memory available for a new COS)
 
F06 (the COS to be copied does not exist)
 
F07 (the COS to be added already exists)
 
F11 (the entered combination of CO/TIE classmarks is contradictory)
 
F13 (the value entered for NEWCOS is larger than the DIMSU maximum)
 
F16 (the parameters for adding and deleting classmarks contain identical values)
 
F18 (the max. number of INFO fields for AMOs is reached)

CHANGE-COSSU

CHANGE-COSSU
		TYPE=COS,COS=<number>, {(min 1) AVCE=<param>, AFAX=<param>, ADTE=<param>, DVCE=<param>, DFAX=<param>, DDTE=<param>, COEX=<number>, INFO=<string>};
		TYPE=COEX,COEX=<number>, COS=<number>;
		TYPE=LCOSV,LCOSV=<number>, {(min 1) ALAUTH=<number>, DLAUTH=<number>, ALCROPT=<param>, DLCROPT=<param>, COPIN=<number>, INFO=<string>};
		TYPE=LCOSD,LCOSD=<number>, {(min 1) ALAUTH=<number>, DLAUTH=<number>, INFO=<string>};
		TYPE=LAUTH,LAUTH=<number>, [INFO=<string>];

If a COS is changed, the change affects all the stations or trunk circuits to which this COS is assigned. You can display this assignment by means of the AMOs ACSU, SCSU/SBCSU and TACSU.

1. TYPE=COS: Change one or more classes of service with the specified parameters. The same COS can be generated several times.
For information on the special characteristics of direct trunk/tie trunk access authorizations, see the parameter description. The COEX parameter has been added for the China features. This parameter can be used to assign an external class of service (COEX 1-16) to a COS (also see introduction to AMO). This assignment can be deleted by specifying COEX=0.

2. TYPE=COEX: Assign authorizations to a COEX (external class of service).
This is done by specifying a COS in which the pertinent authorizations (e.g. RELCON, RERING and AUTOV) are set. This assignment can be changed by specifying a different COS. Deletion of a COEX by removing the assignment to a COS is not available because it is unnecessary.

3. Insert and delete LCR classes of service for voice, fax.

4. Insert and delete LCR classes of service for data (DTE).

Examples:

1. Change authorizations in COS 16. (delete BASIC for FAX, insert RTA3 for voice)

   CHANGE-COSSU:TYPE=COS,COS=16,AVCE=RTA3,DFAX=BASIC;

2. Assign COEX 1 to COS 4.

   CHANGE-COSSU:TYPE=COS,COS=4,COEX=1;

3. Assign an existing COS 50 with China authorizations (such as RELCON, RERING or AUTOV) to COEX 1.

   CHANGE-COSSU:TYPE=COEX,COEX=1,COS=50;

4. Delete the COEX from COS 4.

   CHANGE-COSSU:TYPE=COS,COS=4,COEX=0;

5. The LCR class of service 1 should not contain any LCR authorization.

   CHANGE-COSSU:TYPE=LCOS,LCOS=1;

DELETE-COSSU

DELETE-COSSU

{(min 1) COS=<number>, LCOSV=<number>, LCOSD=<number>};

This operation is used to delete one or more classes of service (COS). The LCR classes of service for voice and fax (LCOSV) and for data (LCOSD) are permanently configured, just as the COEX table. Therefore a LCOSV, LCOSD or COEX can neither be created nor deleted, but only be changed.

The delete command will be rejected if a COS is still used by any station, attendant console or trunk or if the COS is still entered in the COEX table.

Example:

Delete COS 27 and 28.

DELETE-COSSU:COS=27&28;

Possible Error Messages:

 
F01 (the COS to be deleted is still in use)
 
F06 (the COS to be deleted does not exist)
 
F15 (the COS to be deleted is still entered in the COEX table)

DISPLAY-COSSU

DISPLAY-COSSU
		[TYPE=ALL];
		[TYPE=COS],[COS=<number>], [FORMAT=<param>], [INFOPAT=<string>];
		[TYPE=AUTH],[COND=<param>], {(min 1) VCE=<param>, FAX=<param>, DTE=<param>};
		[TYPE=COEX];
		[TYPE=LCOSV],[LCOSV=<number>], [FORMAT=<param>], [INFOPAT=<string>];
		[TYPE=LCOSD],[LCOSD=<number>], [FORMAT=<param>], [INFOPAT=<string>];
		[TYPE=LAUTH],[LAUTH=<number>], [FORMAT=<param>], [INFOPAT=<string>];

1. Output all classes of service. All the configured classes of service, the 16 COEX (even if not assigned to a COS) and all the LCR classes of services are output.

2. Selectively output one or more COS.

3. Output the COS containing the specified authorizations (COND = SUBSET parameter) or the identical COS (COND = EQUAL parameter).

4. Output the external classes of service (COEX).

5. You can display all the LCR classes of service for voice (TYP=LCOSV parameter only) or all the LCR classes of service for data (TYP=LCOSD parameter only) along with their LCR authorizations and options. You can display specific LCR classes of service for voice (TYPE=LCOSV plus LCOSV parameter) or specific LCR classes of service for data (TYP=LCOSD plus LCOSD parameter) along with their LCR authorizations and options.

6. However, you can also display the numbers of the LCR classes of service containing at least one of maximum five predefined LCR authorizations (TYPE=LCOS and LCOS parameter).

7. Finally, you can also output the station numbers of all the stations and the port equipment numbers of all the circuits (by specifying the associated AMO for each) to which a specific COS or a specific LCOSV/D is assigned (TYPE=COS with FORMAT=REF or TYPE=LCOSV/D with FORMAT=REF).

Examples:

1. Display COS 1 and 3 to 5

Input:

DISPLAY-COSSU:TYPE=COS,COS=1&3&&5;

Output:

 
     +-----+----------------+----------------+----------------+ 
     | COS |      VOICE     |       FAX      |       DTE      | 
     +-----+----------------+----------------+----------------+ 
     |   1 |>EXAMPLE 1                                        | 
     |     |       RTA1     |       RTA1     |       RTA1     | 
     |     |       RTA4     |       RTA4     |       RTA4     | 
     |   3 |>EXAMPLE 3                                        | 
     |     |       RTA3     |      NOTIE     |      NOTIE     | 
     |     |       RTA4     |       RTA4     |       RTA4     | 
     |   4 |>                                                 | 
     |     |        RTA     |      NOTIE     |      NOTIE     | 
     |     |      TTCR3     |        RTA     |        RTA     | 
     |     |      TTCR4     |      BASIC     |      BASIC     | 
     |     |     COSXCD     |                |                | 
     |     |      COEX1     |                |                | 
     |     |                |                |                | 
     +-----+----------------+----------------+----------------+

Only COS 1, 3 and 4 are configured. In this case, no INFOTEXT is configured for COS 4.

2. Display the COS containing the specified authorization pattern.

Input:

DISPLAY-COSSU:TYPE=AUTH,COND=SUBSET,VCE=TTCR1&TTCR2;

(Note: COND=SUBSET parameter does not have to be specified because the value of SUBSET is assumed to be the DEFAULT value.)

Output:

 
     +------------------------------------------------------+ 
     |  THE CLASS MARKS ARE CONTAINED IN THE FOLLOWING COS  | 
     +----------+----------+----------+----------+----------+ 
     | COS   24 | COS   25 |          |          |          | 
     +----------+----------+----------+----------+----------+

3. Display COEX and the associated classes of service.

Input:

DISPLAY-COSSU:TYPE=COEX;

Output:

 
     +------+-----+ 
     | COEX | COS | 
     +------+-----+ 
     |  1   |  50 | 
     |  2   |  -  | 
     |  3   |  -  | 
     |  4   |  51 | 
     |  5   |  -  | 
     |  6   |  -  | 
     |  7   |  -  | 
     |  8   |  -  | 
     |  9   |  -  | 
     |  10  |  -  | 
     |  11  |  -  | 
     |  12  |  -  | 
     |  13  |  -  | 
     |  14  |  -  | 
     |  15  |  -  | 
     |  16  |  -  | 
     +------+-----+

4. Output LCOSS 2 to 5

Input:

DISPLAY-COSSU:TYPE=LCOSV,LCOSV=2&&5;

Output:

 
     +----+----------------------------------------------------------------+-----+ 
     |LCOS|             LAUTH                                              | LCR | 
     |  V |         1         2         3         4         5         6    |OPTS=| 
     |    |1234567890123456789012345678901234567890123456789012345678901234|LCRET| 
     |    |>SERVICE INFORMATION                                            | LCR | 
     +----+----+----|----+----|----+----|----+----|----+----|----+----|----+-----+ 
     |   2|XX..............................................................|  .  | 
     |   3|XX..............................................................|  .  | 
     |   4|.............X......................X...........................|  X  | 
     |   5|................................................................|  .  | 
     +----+----------------------------------------------------------------+-----+

5. Output all LCOS with LAUTH 4 and 8

Input:

DISPLAY-COSSU:TYPE=LCOS,LCOS=4&8;

Output:

THE LCR CLASSMARKS ARE CONTAINED IN THE FOLLOWING LCOS : 
     +-----+-----------------------------------------------------------------+ 
     | LCOS|             LCOSV              |             LCOSD              | 
     |     |         1         2         3  |         1         2      3     | 
     |     |12345678901234567890123456789012|12345678901234567890123456789012| 
     |     |>SERVICE INFORMATION                                             | 
     +-----+----+----|----+----|----+----|--+----+----|----+----|----+----|--+ 
     |   4 |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX|X                               | 
     |   8 |XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX|X                               | 
     +---- +-----------------------------------------------------------------+

6. Output all ACs, stations, circuits with LCOSS=1, 2 and 3

Input:

DISPLAY-COSSU:TYPE=LCOSV,LCOSV=1&&3;

Output:

 
     +----+----------------------------------------------------------------+-----+ 
     |LCOS|                            LAUTH                               | LCR | 
     |  V |         1         2         3         4         5         6    |OPTS=| 
     |    |1234567890123456789012345678901234567890123456789012345678901234|LCRET| 
     |    |>SERVICE INFORMATION                                            | LCR | 
     +----+----+----|----+----|----+----|----+----|----+----|----+----|----+-----+ 
     |   1|XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX|  .  | 
     |    |>LCR Attendant for voice                                              | 
     |   2|XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX|  .  | 
     |   3|XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX|  .  | 
     +----+----------------------------------------------------------------+-----+

REGENERATE-COSSU

REGENERATE-COSSU
		[TYPE=COS],[COS=<number>];
		[TYPE=COEX];
		[TYPE=LCOSV],[LCOSV=<number>];
		[TYPE=LCOSD],[LCOSD=<number>];
		[TYPE=LAUTH],[LAUTH=<number>];

If no parameter is entered, all the COS, COEX and LCR COS are regenerated.

1. Regenerate all configured classes of service (TYPE=COS only) or the specified COS (in addition to TYPE=COS, also COS=<number>). The regenerated COS is distributed over several commands (one command per service). If a COS is assigned to a COEX, a CHANGE command with TYPE=COEX is also generated.

2. Regenerate external classes of service (COEX) only.

3. You can regenerate all the LCR classes of service for voice (TYPE=LCOSV parameter only) or all the LCR classes of service for data (TYPE=LCOSD parameter only) along with their LCR authorizations and LCR options. You can regenerate specific LCR classes of service along with their LCR authorizations and LCR options (TYPE=LCOSV/D plus LCOSV/D parameter).

Example:
Regenerate class of service 16

Input:

REGENERATE-COSSU:COS=16;

Output:

 
ADD-COSSU:,16,TA&TNOTCR&CDRATN&CDRSTN&CDRINT,,,,,,,,,,,;

Parameter description

ADTE	DTE Classmark(s) to be added
	Type of Input:	0 to 22 single values, concatenated with &, 3. parameter of a min-1-group		(CHANGE,TYPE=COS-class of service)
	Type of Input:	0 to 22 single values, concatenated with &, optional		(ADD)
	Possible Values:	ACTMAN	allow manual cdr account code
		BASIC	basic authorization
		CCBS	completion of calls to busy subscriber
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRSTN	immediate call detail recording display
		COLR	connected line identification restriction
		DIDBLK	direct-inward-dialing blocking
		DPSTN	dial pulse signalling
		DSM	access to service module (dte)
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDFAS	call forward programming for another subscriber
		HGICLD	hunting group number in call party number
		HOT	hotline
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCCPV	local data in private network
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MSN	multiple subscriber number (send called party no)
		MULTRA	multi-trans (call. station seized several times)
		NOCHRG	without charge
		NOCO	no central office access
		NOTIE	no tie line access
		OVCAT	override category
		RTA	restricted trunk access
		RTIEA	restricted tie access
		SPECAR	special-arrangement
		SUBCAL	b is notified of the number of station a
		SUBDB	b is notified of the default number of station b
		SUBMSN	b is notified of the msn
		TA	unrestricted toll access
		TNOTCR	tie line with no toll code restriction
		TOLLPV	toll call in private network
		TSUID	trunk subscriber identification
		TTCR1	tie access with toll code restriction 1
		TTCR2	tie access with toll code restriction 2
		TTCR3	tie access with toll code restriction 3
		TTCR4	tie access with toll code restriction 4
		TTCR5	tie access with toll code restriction 5
		TTCR6	tie access with toll code restriction 6
		TTT	Transfer Trunk to Trunk (required for CO to CO)
		UUS1IM	use of user - user signaling 1 implicit
		UUS3	use of user - user signaling 3
AFAX	Fax Classmark(s) to be added
	Type of Input:	0 to 22 single values, concatenated with &, 2. parameter of a min-1-group		(CHANGE,TYPE=COS-class of service)
	Type of Input:	0 to 22 single values, concatenated with &, optional		(ADD)
	Possible Values:	ACTMAN	allow manual cdr account code
		BASIC	basic authorization
		CCBS	completion of calls to busy subscriber
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRSTN	immediate call detail recording display
		COLR	connected line identification restriction
		DIDBLK	direct-inward-dialing blocking
		DPSTN	dial pulse signalling
		FAX	access to service module (fax)
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDFAS	call forward programming for another subscriber
		HGICLD	hunting group number in call party number
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCCPV	local data in private network
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MSN	multiple subscriber number (send called party no)
		MULTRA	multi-trans (call. station seized several times)
		NOCHRG	without charge
		NOCO	no central office access
		NOTIE	no tie line access
		OVCAT	override category
		RTA	restricted trunk access
		RTIEA	restricted tie access
		SPECAR	special-arrangement
		SUBCAL	b is notified of the number of station a
		SUBDB	b is notified of the default number of station b
		SUBMSN	b is notified of the msn
		TA	unrestricted toll access
		TNOTCR	tie line with no toll code restriction
		TOLLPV	toll call in private network
		TSUID	trunk subscriber identification
		TTCR1	tie access with toll code restriction 1
		TTCR2	tie access with toll code restriction 2
		TTCR3	tie access with toll code restriction 3
		TTCR4	tie access with toll code restriction 4
		TTCR5	tie access with toll code restriction 5
		TTCR6	tie access with toll code restriction 6
		TTT	Transfer Trunk to Trunk (required for CO to CO)
		UUS1IM	use of user - user signaling 1 implicit
		UUS3	use of user - user signaling 3
ALAUTH	LCR Authorization(s) to be added
	Type of Input:	1 to 16 single values, concatenated with & or &&, 1. parameter of a min-1-group
	Possible Values:	numeric, 1-64
ALCROPT	LCR Option(s) to be added
	Type of Input:	0 to 7 single values, concatenated with &, 3. parameter of a min-1-group
	Possible Values:	CONFTN	confirmation tone required
		LCRET	lcr expensive route tone
		LRTAD	alternate route advance seconds
		NONE	all lcr-options to be deleted
		OHKQ	originating off-hook queuing permission
		OHKQT	tandem off-hook queuing permission
		ONHKQ	originating on-hook queuing permission
		RTADT	route advance tone required
AVCE	Voice Classmark(s) to be added
	Type of Input:	0 to 53 single values, concatenated with &, 1. parameter of a min-1-group		(CHANGE,TYPE=COS-class of service)
	Type of Input:	0 to 53 single values, concatenated with &, optional		(ADD)
	Possible Values:	ACTMAN	allow manual cdr account code
		AHOT	application hotline
		ANICT	malicious call tracing
		ANIPS	issuing a bill for same services req. payment
		ANISS	info about reaching some special services
		ANITC	issuing a bill for a long-distance toll call
		ANSYN	announcements with synchronous start of text
		AOBTR	automatic emergency override on a busy trunk
		ATRACE	automatic call trace in isdn
		AUTOV	automatic override
		BDCP	blocking of directed call pickup
		CCBS	completion of calls to busy subscriber
		CDRATN	call detail recording at attendant
		CDRC	call detail recording central
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRS	call detail recording per station
		CDRSTN	immediate call detail recording display
		CFB	call forwarding on busy
		CFKL	conference from keyset lines
		CFNR	call forwarding on no reply
		CFSWF	switch-over call forward fix to cfw variable
		COIN	public coin operated telephone
		COLR	connected line identification restriction
		COSXCD	cos changeover by code
		CTLS	controlled trunk and line selection
		CW	call waiting
		DATA	non-voice data authorization
		DICT	dictation authorization
		DIDBLK	direct-inward-dialing blocking
		DNDOVR	do not disturb override
		DPSTN	dial pulse signalling
		DSSKEY	key functions via dss keys
		FWDBAR	call forwarding barring
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDECA	call forwarding external call
		FWDEXT	extended call forwarding
		FWDFAS	call forward programming for another subscriber
		FWDNWK	call forwarding to network (i.e. external dest.)
		GRPCAL	group call
		HGICLD	hunting group number in call party number
		HOT	hotline
		INATC	international call
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCC	local call
		LOCCNV	local data (non-voice) call
		LOCCPV	local data in private network
		LSVC	local service
		MANOV	manual override
		MB	mail box (authorization to receive mail)
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MFPAIC	mfrp automatic international call
		MFPIAC	mfrp intrazone automatic call access code 2
		MFPSIC	mfrp semiautomatic international call
		MFPSTC	mfrp semiautomatic toll call access code abc
		MSN	multiple subscriber number (send called party no)
		MTEQ	maintenance equipment
		MTRACE	manual call trace in isdn
		MULTRA	multi-trans (call. station seized several times)
		NATC	national call
		NOARNO	aut. recall must be deact. for subsc. line cir.
	NOCHRG	without charge
	NOCO	no central office access
	NOPTCD	change night opt. of an ac group by dial. a code
	NOREC	Connecting a recorder is not allowed
	NOTIE	no tie line access
	NPINDP	no pin for dailing pattern required
	NSVC	national service
	OFHKRC	code blue
	OVCAT	override category
	PINAFM	identification and follow-me in one step
	PRCO	co subscriber with priority
	PRCO1	co subscriber with priority 1
	PRISTN	station with priority
	PUPHON	public phone
	RECOIG	release control to be ignored
	RELCON	release control
	REOVR	rejection of emergency override
	RERING	ring back
	REVCHA	subscriber with reverse charging
	RKOABS	reject knocking/override, absolute
	RSVLN	access to reserved lines
	RTA	restricted trunk access
	RTIEA	restricted tie access
	SCRNCA	subscriber with no charge party a
	SCRNCB	subscriber with no charge party b
	SCRSPC	subscriber with special charging
	SPECAR	special-arrangement
	SPKR	loudspeaker authorization
	SUBCAL	b is notified of the number of station a
	SUBDB	b is notified of the default number of station b
	SUBEPP	the consulting party is responsible for charge
	SUBMSN	b is notified of the msn
	SUTVA	station user transfer before answer
	TA	unrestricted toll access
	TESTEQ	test equipment
	TNOTCR	tie line with no toll code restriction
	TOLLC	toll call
	TOLLOP	toll operator
	TOLLPV	toll call in private network
	TP	terminal portability
	TRACE	automatic malicious call tracing
	TRANSG	indir. access to priv. network via public netw.
	TSUID	trunk subscriber identification
	TTCR1	tie access with toll code restriction 1
	TTCR2	tie access with toll code restriction 2
	TTCR3	tie access with toll code restriction 3
	TTCR4	tie access with toll code restriction 4
	TTCR5	tie access with toll code restriction 5
	TTCR6	tie access with toll code restriction 6
	TTT	Transfer Trunk to Trunk (required for CO to CO)
	UUS1IM	use of user - user signaling 1 implicit
	UUS3	use of user - user signaling 3
	VCE	access to service module (voice)
COEX	Number of the external COS (China)
	Type of Input:	single value, 7. parameter of a min-1-group		(CHANGE,TYPE=COS-class of service)
		single value, mandatory		(CHANGE,TYPE=COEX-external class of service)
		single value, optional		(ADD)
	Possible Values:	numeric, 0-16		(ADD / CHANGE,TYPE=COS-class of service)
	Possible Values:	numeric, 1-16		(CHANGE,TYPE=COEX-external class of service)
	Default Value:	0 (= none)		(ADD)
COND	Conditions of Comparison
	Type of Input:	single value, optional
	Possible Values:	EQUAL	equality test
	Possible Values:	SUBSET	test if subset of existing cos
	Default Value:	SUBSET
COPIN	Class-of-PIN for dialing pattern (AMO LDPLN)
	Type of Input:	single value, 5. parameter of a min-1-group
	Possible Values:	numeric, 0-5, 10-15
	Default Value:	0 (= none)
COPYCOS	Number of the COS that should be copied
	Type of Input:	single value, optional
	Possible Values:	numeric, 1-1000
	Default Value:	none
COS	Class(es) of Service
	Type of Input:	0 to 5 single values, concatenated with & or &&, 1. parameter of a min-1-group		(DELETE)
		0 to 5 single values, concatenated with & or &&, mandatory		(CHANGE,TYPE=COS-class of service)
		0 to 5 single values, concatenated with & or &&, optional		(DISPLAY,TYPE=COS-class of service / REGENERATE,TYPE=COS-class of service)
		single value, mandatory		(CHANGE,TYPE=COEX-external class of service)
	Possible Values:	numeric, 0-1000		(CHANGE,TYPE=COEX-external class of service)
	Possible Values:	numeric, 1-1000		(CHANGE,TYPE=COS-class of service / DELETE / DISPLAY,TYPE=COS-class of service / REGENERATE,TYPE=COS-class of service)
DDTE	DTE Classmark(s) to be deleted
	Type of Input:	0 to 18 single values, concatenated with &, 6. parameter of a min-1-group		(CHANGE,TYPE=COS-class of service)
	Type of Input:	0 to 18 single values, concatenated with &, optional		(ADD)
	Possible Values:	ACTMAN	allow manual cdr account code
		BASIC	basic authorization
		CCBS	completion of calls to busy subscriber
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRSTN	immediate call detail recording display
		COLR	connected line identification restriction
		DIDBLK	direct-inward-dialing blocking
		DPSTN	dial pulse signalling
		DSM	access to service module (dte)
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDFAS	call forward programming for another subscriber
		HGICLD	hunting group number in call party number
		HOT	hotline
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCCPV	local data in private network
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MSN	multiple subscriber number (send called party no)
		MULTRA	multi-trans (call. station seized several times)
		NOCHRG	without charge
		OVCAT	override category
		SPECAR	special-arrangement
		SUBCAL	b is notified of the number of station a
		SUBDB	b is notified of the default number of station b
		SUBMSN	b is notified of the msn
		TA	unrestricted toll access
		TNOTCR	tie line with no toll code restriction
		TOLLPV	toll call in private network
		TSUID	trunk subscriber identification
		TTCR1	tie access with toll code restriction 1
		TTCR2	tie access with toll code restriction 2
		TTCR3	tie access with toll code restriction 3
		TTCR4	tie access with toll code restriction 4
		TTCR5	tie access with toll code restriction 5
		TTCR6	tie access with toll code restriction 6
		TTT	Transfer Trunk to Trunk (required for CO to CO)
		UUS1IM	use of user - user signaling 1 implicit
		UUS3	use of user - user signaling 3
DFAX	Fax Classmark(s) to be deleted
	Type of Input:	0 to 18 single values, concatenated with &, 5. parameter of a min-1-group		(CHANGE,TYPE=COS-class of service)
	Type of Input:	0 to 18 single values, concatenated with &, optional		(ADD)
	Possible Values:	ACTMAN	allow manual cdr account code
		BASIC	basic authorization
		CCBS	completion of calls to busy subscriber
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRSTN	immediate call detail recording display
		COLR	connected line identification restriction
		DIDBLK	direct-inward-dialing blocking
		DPSTN	dial pulse signalling
		FAX	access to service module (fax)
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDFAS	call forward programming for another subscriber
		HGICLD	hunting group number in call party number
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCCPV	local data in private network
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MSN	multiple subscriber number (send called party no)
		MULTRA	multi-trans (call. station seized several times)
		NOCHRG	without charge
		OVCAT	override category
		SPECAR	special-arrangement
		SUBCAL	b is notified of the number of station a
		SUBDB	b is notified of the default number of station b
		SUBMSN	b is notified of the msn
		TA	unrestricted toll access
		TNOTCR	tie line with no toll code restriction
		TOLLPV	toll call in private network
		TSUID	trunk subscriber identification
		TTCR1	tie access with toll code restriction 1
		TTCR2	tie access with toll code restriction 2
		TTCR3	tie access with toll code restriction 3
		TTCR4	tie access with toll code restriction 4
		TTCR5	tie access with toll code restriction 5
		TTCR6	tie access with toll code restriction 6
		TTT	Transfer Trunk to Trunk (required for CO to CO)
		UUS1IM	use of user - user signaling 1 implicit
		UUS3	use of user - user signaling 3
DLAUTH	LCR Authorization(s) to be deleted
	Type of Input:	1 to 16 single values, concatenated with & or &&, 2. parameter of a min-1-group
	Possible Values:	numeric, 1-64
DLCROPT	LCR Option(s) to be deleted
	Type of Input:	0 to 7 single values, concatenated with &, 4. parameter of a min-1-group
	Possible Values:	CONFTN	confirmation tone required
		LCRET	lcr expensive route tone
		LRTAD	alternate route advance seconds
		OHKQ	originating off-hook queuing permission
		OHKQT	tandem off-hook queuing permission
		ONHKQ	originating on-hook queuing permission
		RTADT	route advance tone required
DTE	Predefined DTE Classmark(s)
	Type of Input:	0 to 22 single values, concatenated with &, 3. parameter of a min-1-group
	Possible Values:	ACTMAN	allow manual cdr account code
		BASIC	basic authorization
		CCBS	completion of calls to busy subscriber
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRSTN	immediate call detail recording display
		COLR	connected line identification restriction
		DIDBLK	direct-inward-dialing blocking
		DPSTN	dial pulse signalling
		DSM	access to service module (dte)
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDFAS	call forward programming for another subscriber
		HGICLD	hunting group number in call party number
		HOT	hotline
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCCPV	local data in private network
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MSN	multiple subscriber number (send called party no)
		MULTRA	multi-trans (call. station seized several times)
		NOCHRG	without charge
		NOCO	no central office access
		NOTIE	no tie line access
		OVCAT	override category
		RTA	restricted trunk access
		RTIEA	restricted tie access
		SPECAR	special-arrangement
		SUBCAL	b is notified of the number of station a
		SUBDB	b is notified of the default number of station b
		SUBMSN	b is notified of the msn
		TA	unrestricted toll access
		TNOTCR	tie line with no toll code restriction
		TOLLPV	toll call in private network
		TSUID	trunk subscriber identification
		TTCR1	tie access with toll code restriction 1
		TTCR2	tie access with toll code restriction 2
		TTCR3	tie access with toll code restriction 3
		TTCR4	tie access with toll code restriction 4
		TTCR5	tie access with toll code restriction 5
		TTCR6	tie access with toll code restriction 6
		TTT	Transfer Trunk to Trunk (required for CO to CO)
		UUS1IM	use of user - user signaling 1 implicit
		UUS3	use of user - user signaling 3
DVCE	Voice Classmark(s) to be deleted
	Type of Input:	0 to 49 single values, concatenated with &, 4. parameter of a min-1-group		(CHANGE,TYPE=COS-class of service)
	Type of Input:	0 to 49 single values, concatenated with &, optional		(ADD)
	Possible Values:	ACTMAN	allow manual cdr account code
		AHOT	application hotline
		ANICT	malicious call tracing
		ANIPS	issuing a bill for same services req. payment
		ANISS	info about reaching some special services
		ANITC	issuing a bill for a long-distance toll call
		ANSYN	announcements with synchronous start of text
		AOBTR	automatic emergency override on a busy trunk
		ATRACE	automatic call trace in isdn
		AUTOV	automatic override
		BDCP	blocking of directed call pickup
		CCBS	completion of calls to busy subscriber
		CDRATN	call detail recording at attendant
		CDRC	call detail recording central
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRS	call detail recording per station
		CDRSTN	immediate call detail recording display
		CFB	call forwarding on busy
		CFKL	conference from keyset lines
		CFNR	call forwarding on no reply
		CFSWF	switch-over call forward fix to cfw variable
		COIN	public coin operated telephone
		COLR	connected line identification restriction
		COSXCD	cos changeover by code
		CTLS	controlled trunk and line selection
		CW	call waiting
		DATA	non-voice data authorization
		DICT	dictation authorization
		DIDBLK	direct-inward-dialing blocking
		DNDOVR	do not disturb override
		DPSTN	dial pulse signalling
		DSSKEY	key functions via dss keys
		FWDBAR	call forwarding barring
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDECA	call forwarding external call
		FWDEXT	extended call forwarding
		FWDFAS	call forward programming for another subscriber
		FWDNWK	call forwarding to network (i.e. external dest.)
		GRPCAL	group call
		HGICLD	hunting group number in call party number
		HOT	hotline
		INATC	international call
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCC	local call
		LOCCNV	local data (non-voice) call
		LOCCPV	local data in private network
		LSVC	local service
		MANOV	manual override
		MB	mail box (authorization to receive mail)
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MFPAIC	mfrp automatic international call
		MFPIAC	mfrp intrazone automatic call access code 2
		MFPSIC	mfrp semiautomatic international call
		MFPSTC	mfrp semiautomatic toll call access code abc
		MSN	multiple subscriber number (send called party no)
		MTEQ	maintenance equipment
		MTRACE	manual call trace in isdn
		MULTRA	multi-trans (call. station seized several times)
		NATC	national call
		NOARNO	aut. recall must be deact. for subsc. line cir.
	NOCHRG	without charge
	NOPTCD	change night opt. of an ac group by dial. a code
	NOREC	Connecting a recorder is not allowed
	NPINDP	no pin for dailing pattern required
	NSVC	national service
	OFHKRC	code blue
	OVCAT	override category
	PINAFM	identification and follow-me in one step
	PRCO	co subscriber with priority
	PRCO1	co subscriber with priority 1
	PRISTN	station with priority
	PUPHON	public phone
	RECOIG	release control to be ignored
	RELCON	release control
	REOVR	rejection of emergency override
	RERING	ring back
	REVCHA	subscriber with reverse charging
	RKOABS	reject knocking/override, absolute
	RSVLN	access to reserved lines
	SCRNCA	subscriber with no charge party a
	SCRNCB	subscriber with no charge party b
	SCRSPC	subscriber with special charging
	SPECAR	special-arrangement
	SPKR	loudspeaker authorization
	SUBCAL	b is notified of the number of station a
	SUBDB	b is notified of the default number of station b
	SUBEPP	the consulting party is responsible for charge
	SUBMSN	b is notified of the msn
	SUTVA	station user transfer before answer
	TA	unrestricted toll access
	TESTEQ	test equipment
	TNOTCR	tie line with no toll code restriction
	TOLLC	toll call
	TOLLOP	toll operator
	TOLLPV	toll call in private network
	TP	terminal portability
	TRACE	automatic malicious call tracing
	TRANSG	indir. access to priv. network via public netw.
	TSUID	trunk subscriber identification
	TTCR1	tie access with toll code restriction 1
	TTCR2	tie access with toll code restriction 2
	TTCR3	tie access with toll code restriction 3
	TTCR4	tie access with toll code restriction 4
	TTCR5	tie access with toll code restriction 5
	TTCR6	tie access with toll code restriction 6
	TTT	Transfer Trunk to Trunk (required for CO to CO)
	UUS1IM	use of user - user signaling 1 implicit
	UUS3	use of user - user signaling 3
	VCE	access to service module (voice)
FAX	Predefined Fax Classmark(s)
	Type of Input:	0 to 22 single values, concatenated with &, 2. parameter of a min-1-group
	Possible Values:	ACTMAN	allow manual cdr account code
		BASIC	basic authorization
		CCBS	completion of calls to busy subscriber
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRSTN	immediate call detail recording display
		COLR	connected line identification restriction
		DIDBLK	direct-inward-dialing blocking
		DPSTN	dial pulse signalling
		FAX	access to service module (fax)
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDFAS	call forward programming for another subscriber
		HGICLD	hunting group number in call party number
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCCPV	local data in private network
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MSN	multiple subscriber number (send called party no)
		MULTRA	multi-trans (call. station seized several times)
		NOCHRG	without charge
		NOCO	no central office access
		NOTIE	no tie line access
		OVCAT	override category
		RTA	restricted trunk access
		RTIEA	restricted tie access
		SPECAR	special-arrangement
		SUBCAL	b is notified of the number of station a
		SUBDB	b is notified of the default number of station b
		SUBMSN	b is notified of the msn
		TA	unrestricted toll access
		TNOTCR	tie line with no toll code restriction
		TOLLPV	toll call in private network
		TSUID	trunk subscriber identification
		TTCR1	tie access with toll code restriction 1
		TTCR2	tie access with toll code restriction 2
		TTCR3	tie access with toll code restriction 3
		TTCR4	tie access with toll code restriction 4
		TTCR5	tie access with toll code restriction 5
		TTCR6	tie access with toll code restriction 6
		TTT	Transfer Trunk to Trunk (required for CO to CO)
		UUS1IM	use of user - user signaling 1 implicit
		UUS3	use of user - user signaling 3
FORMAT	Output format
	Type of Input:	single value, optional
	Possible Values:	L	display of all related definition data
		REF	display all reference objects (AC, station, trunk)	(DISPLAY,TYPE=COS-class of service / DISPLAY,TYPE=LCOSD-lcr class of service for data (dte) / DISPLAY,TYPE=LCOSV-lcr class of service for voice (and fax))
		S	only display of related service information
	Default Value:	L
INFO	Service Information
	Type of Input:	single value, 3. parameter of a min-1-group		(CHANGE,TYPE=LCOSD-lcr class of service for data (dte))
		single value, 6. parameter of a min-1-group		(CHANGE,TYPE=LCOSV-lcr class of service for voice (and fax))
		single value, 8. parameter of a min-1-group		(CHANGE,TYPE=COS-class of service)
		single value, optional		(ADD / CHANGE,TYPE=LAUTH-only select lcos with certain lcr authorizations)
	Possible Values:	text, up to 50 characters
INFOPAT	Pattern to search in the Service Information
	Type of Input:	single value, optional
	Possible Values:	text, up to 50 characters
LAUTH	Predefined LCR Authorization(s)
	Type of Input:	1 to 5 single values, concatenated with & or &&, mandatory		(CHANGE,TYPE=LAUTH-only select lcos with certain lcr authorizations)
	Type of Input:	1 to 5 single values, concatenated with & or &&, optional		(DISPLAY,TYPE=LAUTH-only select lcos with certain lcr authorizations / REGENERATE,TYPE=LAUTH-only select lcos with certain lcr authorizations)
	Possible Values:	numeric, 1-64
LCOSD	LCR Class(es) of Service for Data (DTE)
	Type of Input:	1 to 5 single values, concatenated with & or &&, 3. parameter of a min-1-group		(DELETE)
		1 to 5 single values, concatenated with & or &&, mandatory		(CHANGE,TYPE=LCOSD-lcr class of service for data (dte))
		1 to 5 single values, concatenated with & or &&, optional		(DISPLAY,TYPE=LCOSD-lcr class of service for data (dte) / REGENERATE,TYPE=LCOSD-lcr class of service for data (dte))
	Possible Values:	numeric, 1-1000		(CHANGE,TYPE=LCOSD-lcr class of service for data (dte) / DISPLAY,TYPE=LCOSD-lcr class of service for data (dte) / REGENERATE,TYPE=LCOSD-lcr class of service for data (dte))
	Possible Values:	numeric, 2-1000		(DELETE)
LCOSV	LCR Class(es) of Service for Voice and Fax
	Type of Input:	1 to 5 single values, concatenated with & or &&, 2. parameter of a min-1-group		(DELETE)
		1 to 5 single values, concatenated with & or &&, mandatory		(CHANGE,TYPE=LCOSV-lcr class of service for voice (and fax))
		1 to 5 single values, concatenated with & or &&, optional		(DISPLAY,TYPE=LCOSV-lcr class of service for voice (and fax) / REGENERATE,TYPE=LCOSV-lcr class of service for voice (and fax))
	Possible Values:	numeric, 1-1000		(CHANGE,TYPE=LCOSV-lcr class of service for voice (and fax) / DISPLAY,TYPE=LCOSV-lcr class of service for voice (and fax) / REGENERATE,TYPE=LCOSV-lcr class of service for voice (and fax))
	Possible Values:	numeric, 2-1000		(DELETE)
NEWCOS	Number of the COS that should be added
	Type of Input:	single value, optional
	Possible Values:	numeric, 1-1000
	Default Value:	first number that is still unused
TYPE	Type of the Class of Service (Conditional Parameter)
	Type of Input:	single value, mandatory		(CHANGE)
	Type of Input:	single value, optional		(DISPLAY / REGENERATE)
	Possible Values:	ALL	display of all cos, lcosv, lcosd definitions	(DISPLAY)
		AUTH	display all COS with certain authorizations	(DISPLAY)
		COEX	external class of service
		COS	class of service
		LAUTH	only select lcos with certain lcr authorizations
		LCOSD	lcr class of service for data (dte)
		LCOSV	lcr class of service for voice (and fax)
VCE	Predefined Voice Classmark(s)
	Type of Input:	0 to 53 single values, concatenated with &, 1. parameter of a min-1-group
	Possible Values:	ACTMAN	allow manual cdr account code
		AHOT	application hotline
		ANICT	malicious call tracing
		ANIPS	issuing a bill for same services req. payment
		ANISS	info about reaching some special services
		ANITC	issuing a bill for a long-distance toll call
		ANSYN	announcements with synchronous start of text
		AOBTR	automatic emergency override on a busy trunk
		ATRACE	automatic call trace in isdn
		AUTOV	automatic override
		BDCP	blocking of directed call pickup
		CCBS	completion of calls to busy subscriber
		CDRATN	call detail recording at attendant
		CDRC	call detail recording central
		CDRIND	individual call detail recording in co
		CDRINT	call detail recording of internal calls
		CDRS	call detail recording per station
		CDRSTN	immediate call detail recording display
		CFB	call forwarding on busy
		CFKL	conference from keyset lines
		CFNR	call forwarding on no reply
		CFSWF	switch-over call forward fix to cfw variable
		COIN	public coin operated telephone
		COLR	connected line identification restriction
		COSXCD	cos changeover by code
		CTLS	controlled trunk and line selection
		CW	call waiting
		DATA	non-voice data authorization
		DICT	dictation authorization
		DIDBLK	direct-inward-dialing blocking
		DNDOVR	do not disturb override
		DPSTN	dial pulse signalling
		DSSKEY	key functions via dss keys
		FWDBAR	call forwarding barring
		FWDBAS	call forward programming by another subscriber
		FWDDIR	act/deact/query of call forward incoming
		FWDECA	call forwarding external call
		FWDEXT	extended call forwarding
		FWDFAS	call forward programming for another subscriber
		FWDNWK	call forwarding to network (i.e. external dest.)
		GRPCAL	group call
		HGICLD	hunting group number in call party number
		HOT	hotline
		INATC	international call
		INATCP	international call in private network
		KIESIG	keypad ie signaling possible
		LOCC	local call
		LOCCNV	local data (non-voice) call
		LOCCPV	local data in private network
		LSVC	local service
		MANOV	manual override
		MB	mail box (authorization to receive mail)
		MCIDA	malicious call identification - auto
		MCIDM	malicious call identification - manual
		MFPAIC	mfrp automatic international call
		MFPIAC	mfrp intrazone automatic call access code 2
		MFPSIC	mfrp semiautomatic international call
		MFPSTC	mfrp semiautomatic toll call access code abc
		MSN	multiple subscriber number (send called party no)
		MTEQ	maintenance equipment
		MTRACE	manual call trace in isdn
		MULTRA	multi-trans (call. station seized several times)
		NATC	national call
		NOARNO	aut. recall must be deact. for subsc. line cir.
	NOCHRG	without charge
	NOCO	no central office access
	NOPTCD	change night opt. of an ac group by dial. a code
	NOREC	Connecting a recorder is not allowed
	NOTIE	no tie line access
	NPINDP	no pin for dailing pattern required
	NSVC	national service
	OFHKRC	code blue
	OVCAT	override category
	PINAFM	identification and follow-me in one step
	PRCO	co subscriber with priority
	PRCO1	co subscriber with priority 1
	PRISTN	station with priority
	PUPHON	public phone
	RECOIG	release control to be ignored
	RELCON	release control
	REOVR	rejection of emergency override
	RERING	ring back
	REVCHA	subscriber with reverse charging
	RKOABS	reject knocking/override, absolute
	RSVLN	access to reserved lines
	RTA	restricted trunk access
	RTIEA	restricted tie access
	SCRNCA	subscriber with no charge party a
	SCRNCB	subscriber with no charge party b
	SCRSPC	subscriber with special charging
	SPECAR	special-arrangement
	SPKR	loudspeaker authorization
	SUBCAL	b is notified of the number of station a
	SUBDB	b is notified of the default number of station b
	SUBEPP	the consulting party is responsible for charge
	SUBMSN	b is notified of the msn
	SUTVA	station user transfer before answer
	TA	unrestricted toll access
	TESTEQ	test equipment
	TNOTCR	tie line with no toll code restriction
	TOLLC	toll call
	TOLLOP	toll operator
	TOLLPV	toll call in private network
	TP	terminal portability
	TRACE	automatic malicious call tracing
	TRANSG	indir. access to priv. network via public netw.
	TSUID	trunk subscriber identification
	TTCR1	tie access with toll code restriction 1
	TTCR2	tie access with toll code restriction 2
	TTCR3	tie access with toll code restriction 3
	TTCR4	tie access with toll code restriction 4
	TTCR5	tie access with toll code restriction 5
	TTCR6	tie access with toll code restriction 6
	TTT	Transfer Trunk to Trunk (required for CO to CO)
	UUS1IM	use of user - user signaling 1 implicit
	UUS3	use of user - user signaling 3
	VCE	access to service module (voice)

Error Messages

F01	F01: COS @@@@ CANNOT BE DELETED SINCE IT IS STILL IN USE ( DISP-COSSU:TYPE=COS,COS=@@@@,FORMAT=REF; )
F05	F05: THERE IN NO MEMORY AVAILABLE FOR A NEW COS ( DISP-DIMSU:PARAM=COS; RESP. ADD-DIMSU:COS=@@@@; )
F06	F06: COS @@@@ DOES NOT EXIST
F07	F07: COS @@@@ ALREADY EXISTS
F11	F11: THE ENTERED COMBINATION OF CO/TIE TRUNK CLASSMARKS FOR PARAMETER @@@@@ IS CONTRADICTORY
F13	F13: COS @@@@ IS LARGER THAN THE MAXIMUM CONFIGURED BY AMO DIMSU ( DISP-DIMSU:PARAM=COS; RESP. ADD-DIMSU:COS=@@@@; )
F15	F15: COS @@@@ CANNOT BE DELETED SINCE IT IS ASSIGNED TO COEX @@ ASSIGN COEX TO ANOTHER COS ( CHANGE-COSSU:TYPE=COEX,COEX=@@,COS=??; )
F16	F16: @@@@@@@@ AND @@@@@@@@ MUST NOT CONTAIN IDENTICAL VALUES
F18	F18: THE MAXIMUM NUMBER OF INFO FIELDS FOR AMOS IS REACHED ( DISP-DIMSU:PARAM=INFO; RESP. ADD-DIMSU:INFO=@@@@; )
F19	F19: COEX @@@@ CANNOT BE EMPTY, SINCE IT IS STILL USED IN COS @@@@
F20	F20: THE MAXIMUM NUMBER OF LCOS FIELDS FOR AMOS IS REACHED ( DISP-DIMSU:PARAM=LCRCOS; RESP. ADD-DIMSU:LCRCOS=@@@@; )
F21	F21: LCOSV @@@@ DOES NOT EXIST
F22	F22: LCOSD @@@@ DOES NOT EXIST
F23	F23: LCOSV @@@@ CANNOT BE DELETED SINCE IT IS STILL IN USE ( DISP-COSSU:TYPE=LCOSV,LCOSV=@@@@,FORMAT=REF; )
F24	F24: LCOSD @@@@ CANNOT BE DELETED SINCE IT IS STILL IN USE ( DISP-COSSU:TYPE=LCOSD,LCOSD=@@@@,FORMAT=REF; )

Advisory Messages

H01	H01: COS @@@@ HAS BEEN DELETED
H02	H02: COS @@@@ HAS BEEN ADDED
H03	H03: @@@@@ @@@@ HAS BEEN CHANGED
H04	H04: THE NUMBER OF THE COS ADDED IS @@@@
H05	H05: THE NEW COS @@@@ AND THE COPIED COS @@@@ ARE IDENTICAL
H06	H06: NO MEMORY ALLOCATED FOR THE PARAMTER COS ( DISP-DIMSU:TYPE=ALL,PARAM=COS; )
H07	H07: FOUND NO LCOS FOR THE GIVEN LCR AUTHORIZATIONS
H08	H08: FOUND NO @@@@@ WITH REFERENCE OBJECTS (AC, STATION OR TRUNK)
H09	H09: FOUND NO @@@@@ WITH MATCHING INFO FIELD
H10	H10: A COS WHICH CONTAINS THE REQUESTED CLASSMARKS DOES NOT EXIST
H11	H11: A COS WHICH CONTAINS EXACTLY THE REQUESTED CLASSMARKS DOES NOT EXIST
H12	H12: NO CLASS OF SERVICE EXISTS
H13	H13: LCOSV @@@@ HAS BEEN DELETED
H14	H14: LCOSD @@@@ HAS BEEN DELETED