138.4 Parameter Description


CMD	OUTDIAL RULE COMMAND
	Type of Input	:	single value,	mandatory	(ADD)
	Possible Values	:	DTMF	Set outpulse mode to DTMF
			CPNLIN	Send an up to 22 digit CPN or LIN
			ECHO	Outpulse all the digits of a specified field
			ECHOALL	Outpulse all the digits of all remaining fields
			END	The end of the ODR command sequence
			NPI	Network plan identifier
			NWOP	Network operator
			OUTCODE	Outpulse the authorization code (AMO LAUTH)
			OUTCOEX	Outpulse the class-of-external
			OUTCSN	Outpulse the call serial number
			OUTPULSE	Outpulse specific digits
			PAUSE	Start a pause timer for a specified duration
			SENDKEYP	Dialinformation will be sent as a keypadinformation element.
			SENDCOMP	Sending complete
			SENDNOW	Send second digit block now
			WAITANS	Wait for dialing tone

CMDPOS	POSITION OF THE COMMAND IN THE OUTDIAL RULE
	When a CMD is added, overwritten or deleted, its exact position is determined (and can be displayed with DIS-LODR)
	Type of Input	:	single value,	optional	(ADD)
			single value, &, &&, mandatory
			(up to 10 individual concatenations or 5 individual range inputs
				if TYPE=CMD)	(DEL)
	Possible Values	:	1-100

COEX	NUMBER OF THE CLASS OF EXTERNAL TO BE OUTPULSED
	(see AMO COSSU)
	Type of Input	:	single value,		(ADD)
			mandatory if CMD=OUTCOEX
	Possible Values	:	1-16

DGTS	DIGIT STRING FOR OUTPULSE
	Type of Input	:	string (up to 22 digits),		(ADD)
			mandatory if CMD=OUTPULSE
	Possible Values	:	0-9, *,A-D

FIELD	FIELD NUMBER TO BE OUTPULSED
	Type of Input	:	single value,	optional	(ADD)
			mandatory if CMD=ECHO
	Possible Values	:	1-10
	Note	:	FIELD=1 usually corresponds to the routing code, which is not normally outpulsed

FORMAT	Format of output
	Type of Inpu	:	single value,	optional
	Possible Values		S :Short output format L : Long output format

INDEX	INDEX (I.E. TO NETWORK OPERATOR’S NUMBER)
	This parameter identifies a specific commercial communication network for which its operator has defined an authorization code for network access (see AMO LAUTH) and/or outpulsing of an automatically incremented control number for each network access (protection against misuse).
	Type of Input	:	single value,		(ADD)
			mandatory if CMD=OUTCODE
			mandatory if CMD=OUTCSN
	Possible Values	:	1-4

INFO	Service information text
	Type of Inpu	:	single value,	optional
	Possible Values		50 character long free text string

INFOPAT	Service informations text pattern
	Type of Inpu	:	single value,	optional
	Possible Values		50 character long free text string

NPI	NETWORK PLAN IDENTIFIER
	Type of Input		single value,	mandatory, conditional	(ADD)
	Possible Values	:	DATA	Data numbering plan
			ISDN	ISDN numbering plan
			LANDMOB	Land mobile numbering plan
			MARITMOB	Maritime mobile numbering plan
			NATIONAL	National number
			PRIVATE	Private numbering plan
			TELEX	Telex numbering plan
			UNKNOWN	Unknown
	Default Value	:	UNKNOWN

ODR	OUTDIAL RULE NUMBER
	Type of Input	:	single value,	mandatory	(ADD)
			single value, &, &&,	mandatory
			(up to 10 individual concatenations or 5 individual range inputs)
				if TYPE=ODR	(DEL)
			single value,	mandatory
				if TYPE=CMD	(DEL)
			single value, &, &&, optional		(DIS,REGEN)
			(up to 10 individual concatenations or 5 individual range inputs)
	Possible Values	:	1-4096 (AMO DIMSU, parameter ODR)

OPTYPE	Opertator type
	Type of Input	:	single value,	mandatory
	Possible Values	:	ALTOP	Request alternate operator
			PRINOP	Request principal operator
	Default Value	:	-
REPLACE	REPLACE OR INSERT THE COMMAND
	Type of Input		single value,	optional	(ADD)
	Possible Values	:	YES	CMD is to be overwritten
				(CMDPOS mandatory)
			NO	CMD is to be inserted
				(CMDPOS mandatory)
				or added
				(without CMDPOS)
	Default Value	:	NO

TIME	TIMER VALUE IN SECONDS
	Type of Input	:	single value,		(ADD)
			mandatory if CMD=WAITANS
			mandatory if CMD=PAUSE
	Possible Values	:	1-255

TON	TYPE OF NUMBER
	Type of Input		single value,	mandatory if CMD = NPI	(ADD)
	Possible Values	:	LEVEL1	Area level 1 regional
			LEVEL2	Area level 2 regional
			INTERNAT	International number
			LOCAL	Local
			NATIONAL	National number
			SUBSCR	Local subscriber number
			UNKNOWN	Unknown
	Default Value	:	UNKNOWN

TYPE	TYPE OF DELETE
	Type of Input	:	single value,	mandatory	(DEL)
	Possible Values	:	ODR	Delete entire outdial rule
				(parameter ODR mandatory)
			CMD	Delete individual outdial rule commands from an outdial rule
				(parameters ODR and CMDPOS mandatory)

OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620

© 09/2025 Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.