145 LWPAR - Loadware Parameters for Networking Modules

For the analog networking circuits, the blocks in question must be assigned the appropriate circuit type and, if required, adapted by the AMO LWPAR.
Assignment to circuit types is completely unrestricted.
A maximum of 80 different parameter blocks can be assigned. (0 - 79)
Parameter blocks are assigned to the analog circuits with AMO TACSU, parameter LWPAR.

The parameter blocks are assigned to the digital circuits (e.g. DIU-S2, CDG or TMD) with the AMO TDCSU, parameter LWPAR.

Parameter blocks are assigned to the DIUC circuits with AMO BCSU, parameter LWPAR1 and LWPAR2.

The AMO LWPAR must be called before the AMO TACSU or TDCSU.
In order for parameterizing to take effect, the parameter blocks must be loaded to the respective module. This applies for both initial assignment of a parameter block and for subsequent alterations of parameters. Loading of the parameter blocks is carried out automatically at the time of initial startup of the circuit; for subsequent alterations it is carried out by deactivating and then reactivating the circuit involved using AMO DSSU. What circuits definitely have been changed will be told by advisory H04.
What circuits of the CDG board have been changed - if there is any - will be told by advisories H06 resp. H07.