145.3.4 DISPLAY-LWPAR

Display the contents of the parameter blocks for digital circuits (e.g. DIUS2, CDG or TMD) and for analog NW circuits.
Procedure Overview
 
Command Code
Parameter
DISPLAY-LWPAR
[INFOPAT=<string>],[FORMAT=<param>],[DEV=<param>],
 
| [TYPE=DIUS2],[BLNO=<number>],[SOURCE=<param>];
 
 
 
| [TYP=DIUC],[BLNO=<number>];
 
 
 
| [TYPE=NWWTK],[BLNO=<number>];
 
 
 
| [TYPE=CDG],[BLNO=<number>],[LWPARREF=<param>],
 
[SOURCE=<param>];
 
 
 
|[TYPE=TMD],
 
|TMDTYPE=TMDMOS,[BLNO=<number>];
 
|TMDTYPE=TMDBOS,[BLNO=<number>];
 
 
 
| [TYPE=DIUS2VAR],[VARNO=<number>];
 
 
 
| [TYPE=CDGVAR],[VARNO=<number>];
Note
The saved INFO strings (service information) can be displayed. Depending on the parameter FORMAT the INFO string can be displayed in long or short format. In short format only the block number and the INFO string is output if available. It is possible to search for any text pattern using the parameter INFOPAT. In this case only those blocks are displayed in appropriate output format which contain the given text pattern.
For selecting one or more parameter blocks one has the parameters INFOPAT, DEV, TYPE and BLNO. The selection criteria may be combined, thus only parameter blocks satisfying all specified conditions will be displayed.
In case of parameter blocks of type DIUS2 and CDG the set of search conditions can be complemented by the parameter SOURCE (search on HD or in DB).
Important: while searching for parameter blocks on the HD only the selection parameter DEV is taken into consideration.
The structure of the TMD block doesn‘t contain the fields for DEVICE and INFO. If between the search criterias one of them is present, the AMO sends the message H21, and these values are ignored.
The mapping tables of the CDG parameter blocks are displayed only if at least one table entry deviates from the default setting.
•
In the tables LCOSVRRG, LCOSDRRG und TRGCBG all entries are marked with “<“ which have multiple occurancies.
Attention: before downloading these tables any multiplicities in the tables have to be eliminated.
•
In the table DXTGITR the so called PRIMARY entries are marked with a “*“.
Example
1.
Add a new CDG parameter block with BLNO=15.
Input:
CHANGE-LWPAR:TYPE=CDG,BLNO=15,CDGTYPE=CONF,INFO=TEST BLNO 15 CDG;
Output:
DISPL-LWPAR:TYPE=CDG,BLNO=15;
+---------------------------------------------------------------------+
| LOADWARE PARAMETERS CIRCUIT TYPE: CDG SOURCE:DB BLOCK: 15 |
+---------------------------------------------------------------------+
| [R]UNWD = DPACN [R]PATTERN = 213 |
| [C]BCHNEG = Y [C]CRC4C = N [C]CRC4REP = N |
| [C]TEMPSIG= Y [C]NSITR = Y [C]NSIOUT = Y |
| [C]CDGCF = Y [C]CONVBN = N [C]TIDOP = Y |
| [C]C3CONF = Y [C]CONACK = Y [B]LSCF = N |
| [C]NSIMSGS= 150 [C]SADRTM = NSAP [C]MAXTMS = 500 |
| [C]RESTLNK= Y [C]RESTALL = Y |
| [C]AROB = N [C]SCCONF = N [C]ATCPN = 12 |
| [C]ICPN = 11 [C]APCPN = 14 [C]DASSCPN = 13 |
| [C]T301 = 180 SEC [C]T302 = 10 SEC [C]T303 = 4 SEC |
| [C]T304 = 15 SEC [C]T305 = 30 SEC [C]T308 = 4 SEC |
| [C]T309 = 90 SEC [C]T310 = 10 SEC [C]T313 = 4 SEC |
| [C]T314 = 4 SEC [C]T316 = 120 SEC [C]T322 = 4 SEC |
| [C]TBID = 5 SEC [C]TDPNSSC = 500 MSEC [C]TROPTBR = 10 SEC |
| [C]TWEOS = 60 SEC [C]TAMOST = 60 [C]TROPTNR = 30 SEC |
| [C]DEFID = B010 [C]TSABMR = 200 MSEC [C]TAROB = 10 SEC |
| [R]PROT = DPNSSN [C]VMSYSTAD = 0 |
| [R]BCHKONF = 16&&30 |
| [R]EQVIRC = 1&&30 |
| [R]VCHCONF = 16&&30 |
| RES3 = 0 RES4 = 0 RES5 = 0 |
| DEV = INDEP TIPL = 10 IPLDS = A |
| LCOSMAP(Y=ENABLED,N=DISABLED) = N DEFPASSW = 9999 |
| INFO = |
+---------------------------------------------------------------------+
| DEFC: CIRCUIT SPECIFIC DATA WITHOUT BOARD LEVEL SWITCHING |
| (CIRCUIT LEVEL SWITCHING BY AMO-DSSU NEVERTHELESS REQUIRED) |
| DEFR: CIRCUIT SPECIFIC DATA WITH BOARD LEVEL SWITCHING |
| (PLUS CIRCUIT LEVEL SWITCHING BY AMO-DSSU REQUIRED) |
| DEFB: BOARD SPECIFIC DATA |
| (BOARD LEVEL SWITCHING REQUIRED) |
+---------------------------------------------------------------------+
<
2.
Display block 15 in short format.
Input:
DISP-LWPAR:TYPE=CDG,BLNO=15,FORMAT=S;
Output:
+---------------------------------------------------------------------+
| BLNO CIRC.TYPE INFO SOURCE: DB |
+------+---------+----------------------------------------------------+
| 15 | CDG | TEST BLNO 15 CDG                     |
+---------------------------------------------------------------------+
<
3.
Adding mapping tables in block 15, circuit type CDG
Input:
CHANGE-LWPAR:CDG,15,MAPPING,LCOSVRRG,1&2&3&4,51&51&53&54;
CHANGE-LWPAR:CDG,15,MAPPING,TRGCBG,1&2&3&4,22&22&23&24;
CHANGE-LWPAR:CDG,15,MAPPING,DXTGITR,1&2&3&4,21&22&23&24,1,21;
DISP-LWPAR:TYPE=CDG,BLNO=15;
Output:
+---------------------------------------------------------------------+
| LOADWARE PARAMETERS CIRCUIT TYPE: CDG SOURCE:DB BLOCK: 15 |
+---------------------------------------------------------------------+
| [R]UNWD = DPACN [R]PATTERN = 213 |
| [C]BCHNEG = Y [C]CRC4C = N [C]CRC4REP = N |
| [C]TEMPSIG= Y [C]NSITR = Y [C]NSIOUT = Y |
| [C]CDGCF = Y [C]CONVBN = N [C]TIDOP = Y |
| [C]C3CONF = Y [C]CONACK = Y [B]LSCF = N |
| [C]NSIMSGS= 150 [C]SADRTM = NSAP [C]MAXTMS = 500 |
| [C]RESTLNK= Y [C]RESTALL = Y |
| [C]AROB = N [C]SCCONF = N [C]ATCPN = 12 |
| [C]ICPN = 11 [C]APCPN = 14 [C]DASSCPN = 13 |
| [C]T301 = 180 SEC [C]T302 = 10 SEC [C]T303 = 4 SEC |
| [C]T304 = 15 SEC [C]T305 = 30 SEC [C]T308 = 4 SEC |
| [C]T309 = 90 SEC [C]T310 = 10 SEC [C]T313 = 4 SEC |
| [C]T314 = 4 SEC [C]T316 = 120 SEC [C]T322 = 4 SEC |
| [C]TBID = 5 SEC [C]TDPNSSC = 500 MSEC [C]TROPTBR = 10 SEC |
| [C]TWEOS = 60 SEC [C]TAMOST = 60 [C]TROPTNR = 30 SEC |
| [C]DEFID = B010 [C]TSABMR = 200 MSEC [C]TAROB = 10 SEC |
| [R]PROT = DPNSSN [C]VMSYSTAD = 0 |
| [R]BCHKONF = 16&&30 |
| [R]EQVIRC = 1&&30 |
| [R]VCHCONF = 16&&30 |
| RES3 = 0 RES4 = 0 RES5 = 0 |
| DEV = INDEP TIPL = 10 IPLDS = A |
| LCOSMAP(Y=ENABLED,N=DISABLED) = N DEFPASSW = 9999 |
| INFO = |
+---------------------------------------------------------------------+
| DEFC: CIRCUIT SPECIFIC DATA WITHOUT BOARD LEVEL SWITCHING |
| (CIRCUIT LEVEL SWITCHING BY AMO-DSSU NEVERTHELESS REQUIRED) |
| DEFR: CIRCUIT SPECIFIC DATA WITH BOARD LEVEL SWITCHING |
| (PLUS CIRCUIT LEVEL SWITCHING BY AMO-DSSU REQUIRED) |
| DEFB: BOARD SPECIFIC DATA |
| (BOARD LEVEL SWITCHING REQUIRED) |
+---------------------------------------------------------------------+
| CIRC.TYPE: CDG TABLE : LCOS <-> RRG BLNO : 15 |
| MAPPING: LCOSVRRG |
+-----------------+----------------+----------------+-----------------+
| LCOS - RRG | LCOS - RRG | LCOS - RRG | LCOS - RRG |
+-----------------+----------------+----------------+-----------------+
| 1 - 51 < | 9 - 8 | 17 - 16 | 25 - 24 |
| 2 - 51 < | 10 - 9 | 18 - 17 | 26 - 25 |
| 3 - 53 | 11 - 10 | 19 - 18 | 27 - 26 |
| 4 - 54 | 12 - 11 | 20 - 19 | 28 - 27 |
| 5 - 4 | 13 - 12 | 21 - 20 | 29 - 28 |
| 6 - 5 | 14 - 13 | 22 - 21 | 30 - 29 |
| 7 - 6 | 15 - 14 | 23 - 22 | 31 - 30 |
| 8 - 7 | 16 - 15 | 24 - 23 | 32 - 31 |
+---------------------------------------------------------------------+
| CIRC.TYPE: CDG TABLE : TRG <-> CBG BLNO : 15 |
| MAPPING: TRGCBG |
+-----------------+----------------+----------------+-----------------+
| TRG - CBG | TRG - CBG | TRG - CBG | TRG - CBG |
+-----------------+----------------+----------------+-----------------+
| 0 - 0 | 4 - 24 | 8 - 8 | 12 - 12 |
| 1 - 22 < | 5 - 5 | 9 - 9 | 13 - 13 |
| 2 - 22 < | 6 - 6 | 10 - 10 | 14 - 14 |
| 3 - 23 | 7 - 7 | 11 - 11 | 15 - 15 |
+---------------------------------------------------------------------+
| CIRC.TYPE: CDG TABLE : DXTG <-> ITR BLNO : 15 |
| MAPPING: DXTGITR |
+----------------------------------+----------------------------------+
| POS DXTG - ITR PRIM | POS DXTG - ITR PRIM |
+----------------------------------+----------------------------------+
| 0 - | 1 21 - 1 * |
| 2 22 - 1 | 3 23 - 1 |
| 4 24 - 1 | 5 - |
| 6 - | 7 - |
| 8 - | 9 - |
| 10 - | 11 - |
| 12 - | 13 - |
| 14 - | 15 - |
| 16 - | 17 - |
| 18 - | 19 - |
| 20 - | 21 - |
| 22 - | 23 - |
| 24 - | 25 - |
| 26 - | 27 - |
| 28 - | 29 - |
| 30 - | 31 - |
+---------------------------------------------------------------------+
OpenScape 4000 V11, Volume 1: AMO Descriptions, Service Documentation, Issue 6, ID: P31003H31A0S107067620
 © 05/2026 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.