156.2.1
ADD-RCUT
Enter a CDR code allocation.
The customer-specific CDR code and the allocated route code are entered.
Part qualified entries are possible (i.e. 00 for all route codes which with 00 begin, that are international calls).
Procedure Overview
Command Code
Parameter
ADD-RCUT
RTECD=<string>,CDRCODE=<number>;
Example
1.
The route code 123456 is to be allocated the customer-specific CDR code 654321.
Input:
ADD-RCUT:RTECD=123456,CDRCODE=654321;
2.
A system contains several trunk groups for outgoing calls. For the CDR (call detail recording) output, however, all calls are to be output under ONE code (9).
Trunk Group Codes: 5, 6, 7
Solution:
The same customer-specific CDR code is allocated to all outgoing trunk groups (see AMO-
SELG
).
Input:
ADD-RCUT:RTECD=5,CDRCODE=9;
ADD-RCUT:RTECD=6,CDRCODE=9;
ADD-RCUT:RTECD=7,CDRCODE=9;
NOTE:
1.
Add for example
ADD-RCUT:RTECD=0,CDRCODE=0;
ADD-RCUT:RTECD=01,CDRCODE=0;
is not possible. 2nd entry is coverd with 1st entry.
2.
Add a new entry, which is used to add a valid entry 123 into the charge data block without routing code.
ADD-RCUT:RTECD=DDDDDD,CDRCODE=123;
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.