181.2.3
DELETE SSCSU
With the action DELETE
•
subscribers are deleted on the basis of their number. An individual service (e.g. DTE) cannot be deleted.
In all cases, several (max. 10) individual values or ranges can also be entered for the parameter STNO.
Note :
With optional parameter OFFTYPE you can control, whether AMO SSCSU itself will execute a soft lock (DC, default!), a hard lock (DI) or no lock (NL) on the subscriber. In the last case the number to be deleted must be locked beforehand with the AMO
DSSU
!
SSCSU subscribers must not be contained in an executive/secretary configuration. Only HTBLINE may be entered in the other group relations (collective line, call collect group, ...). In this case, HTBLINE cannot be deleted (error message).
Subscribers who are still entered in the ACD routing table or who possess an ACD feature cannot be deleted.
Procedure Overview
Command code
Parameter
DELETE-SSCSU
STNO=<number>,[OFFTYPE=<param>];
Examples
1.
Delete
Input:
DELETE-SSCSU:STNO=3427;
Output:
H06: 3427 STATION DATA DELETED.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5
, ID:
P31003H31A0S107057620
©
09/2025
Mitel Networks Corporation. - All rights reserved.
Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.