188.4 Error Messages and Advisories

188.4.1 Error Messages

 
F01:
STANDARD ^zahl^ FOR ^digtyp^ CANNOT BE CHANGED , SINCE IT IS CURRENTLY IN USE. PLEASE ENTER A NEW STANDARD NUMBER.
F02:
IF A STANDARD NUMBER HAS BEEN SPECIFIED, THE PARAMETER DIGTYP MUST ALSO BE SPECIFIED.
F03:
NO ASSOCIATED VALUES MAY BE ENTERED FOR PARAMETER DIGTYP.
 
<digtyp> IGNORED.
F04:
STANDARDS CANNOT BE LOADED AT AN ADD-ON TERMINAL.
F05:
KEY<xx> DOES NOT EXIST ON <digtyp>.
F06:
^tln^ INDIVIDUAL KEY FUNCTION ASSIGNMENT NOT PERMITTED FOR <xxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
F06:
INDIVIDUAL KEY FUNCTION ASSIGNMENT NOT PERMITTED FOR ^digtyp^.
F07:
THE KEY FUNCTION ^code^ IS NOT ALLOWED FOR ^digtyp^.
F08:
MORE THAN ONE <funct> KEY ASSIGNED.
F09:
<place>: MORE THAN <number> <funct> KEYS ASSIGNED.
F09:
AT DIGTYP ^digtyp^ MORE THAN ^number^ ^funct^ KEYS ASSIGNED.
F09:
AT STNO ^tln^^bis^^tln2^ MORE THAN ^number^ ^funct^ KEYS ASSIGNED.
F10:
LOWER RANGE LIMIT <stno1> OF PARAMETER STNO IS HIGHER THAN UPPER LIMIT <stno2>.
 
(Example: 900&&799 is wrong, 799&&900 is correct)
F11:
STATION <stno> IS NOT CONFIGURED.
 
is not output if more than one single value entered for STNO
F12:
STATION <stno> IS NOT CONFIGURED IN "HOME" NODE.
 
is not output if more than one single value entered for STNO
F13:
STATION ^tln^ DOES NOT HAVE TERMINAL TYPE SPECIFIED.
F14:
AT STATION <stno> THE ADD-ON TERMINAL <number> IS NOT CONFIGURED.
F15:
STATION <stno>: <funct> IS ACTIVE.
F16:
<funct> KEY OF STATION <stno> CANNOT BE RE-ALLOCATED, SINCE
 
NEW MESSAGES STILL EXIST IN THE USER’S MAILBOX.
F18:
STNO <stno> IS INVALID.
F19:
STNO <stno> ONLY PERMITTED AS SINGLE VALUE.
F22:
STN <stn> IS NOT OPTISET.
F23:
NO FREE DESTINATION MEMORY FOR DSS/NAME KEYS AT STN <stn>.
F24:
THE KEY ^zahl^ FOR A ^digtyp^ MAY NOT BE CHANGED.
F25:
FOR STATION <stn> WITH COM-MANAGER THE ADD-ON TERMINALS 3 AND 4
ARE NOT AVAILABLE.
F26:
FOR <digtyp>, NOT NORE THAN <n> <funct> FUNCTION ALLOWED.
F27:
<(FOR DIGTYP=<digtyp>/STN <tln> WITH DIGTYP=<digtyp>,)> STD > <snu> IS NOT ALLOWED.
F28:
FOR STN <stno> THE FUNCTION LINE ON KEY <n> CANNOT BE
RE-ALLOCATED, SINCE IT IS USED AS PRIMELINE RESP. SECONDARYLINE.
(DISP-KCSU:STNO=<stno>;)
F29:
PATTERN SEARCH CAN ONLY BE SPECIFIED FOR DIGTYP=STDDEV.
F29
INFO:
SERVICE INFO CAN ONLY BE SPECIFIED FOR DIGTYP=STDDEV.
F30:
THE KEY FUNCTION <funct> IS NOT ALLOWED FOR EXECUTIVE TEAMMEMBER.
F32:
TEAMMEMBER <tln> IS A SIGNED OFF KEYSET. CHANGE NOT ALLOWED.
F33:
THE KEY <N> WITH FUNCTION <funkt> FOR A KEYSET TEAMMEMBER <stno> MAY NOT BE CHANGED.
F34:
THE KEY FUNCTION <funkt> (KEY <N>) FOR STN <stno> HAS WRITE PROTECTION.
DELETE DESTINATION ENTRY FIRST WITH AMO ZIELN.
F35:
THE KEY FUNCTIONS BUSYLAMP AND DOOROPEN CAN ONLY BE SET ALTERNATIVELY.
F36:
THE KEY FUNCTION MBLINE IS ALLOWED WHEN THE FEATURE AND THE NECESSARY PATCHES ARE ACTIVATED.
F37:
A CHANGE OF DIGTYP IS ONLY POSSIBLE WHEN SIMULTANEOUS A KEY FUNCTION IS CHANGED.
F38:
FOR OPENSTAGE AND DPIP PHONES, POSITION OF FUNCTIONS LOCATED AT 1ST - 8TH KEYS ARE FIXED.
F39:
THE KEY FUNCTION ^code^ HAS FIXED POSITION ON THIS PHONES TYPE THEREFORE CAN NOT BE MOVED TO ANOTHER POSITION.
F43:
SHIFT KEY IS NOT ALLOWED FOR OPENST15, OPENST30, OST30BLF AND OPTIBLF.
F44:
ONLY TWO LINE KEYS ARE ALLOWED WHEN TWINNING IS ACTIVE.
F45:
FOR STN ^tln^ THE FUNCTION RNGXFER ON KEY ^zahl^ CANNOT BE OVERWRITTEN, SINCE IT IS ASSIGNED IN A CHESE GROUP. (DISP-CHESE:STN,^tln^;)
F46:
AD5 CAN ONLY BE CONFIGURED FOR STANDARDS WITH BLF."
F47:
THE KEY FUNCTION SHIFT IS NOT ALLOWED ON BLF ADDON.
F48:
FOR DPIP55 PHONES, POSITION OF FUNCTIONS LOCATED AT 1ST - 8TH AND 17TH - 19TH KEYS ARE FIXED.
F49:
THE KEY FUNCTION SNR/LNR HAS FIXED POSITION ON THIS PHONES TYPE THEREFORE IT CAN NOT BE ADDED.
F50:
FOR CP400/ CP600/ CP700 PHONES, POSITION OF FUNCTIONS LOCATED
AT 1ST - 8TH AND 17TH - 24TH KEYS ARE FIXED.
F51:
STN @@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IS UFIP.
OpenScape 4000 V10, Volume 1: AMO Descriptions, Service Documentation, Issue 5, ID: P31003H31A0S107057620
 © 09/2025 Mitel Networks Corporation. -  All rights reserved.
 Mitel and the Mitel logo are trademarks of Mitel Networks Corporation. Unify and associated marks are trademarks of Unify Software and Solutions GmbH&Co. KG. All other trademarks herein are the property of their respective owners.